- Computers & electronics
- Computer components
- System components
- Motherboards
- Congatec
- conga-TS170
- User manual
advertisement
![2 Specifications. Congatec conga-TS170 | Manualzz 2 Specifications. Congatec conga-TS170 | Manualzz](http://s2.manualzz.com/store/data/062037433_1-5416e5c6953945c3bc12743a0b60250e-360x466.png)
2
2.1
Specifications
Feature List
Table 3 Feature Summary
Form Factor
Processor
Memory
Based on COM Express™ standard pinout Type 6 Rev. 2.1 (Basic size 95 x 125 mm)
Intel ® 6th Generation Core i7,i5,i3 Celeron and Xeon mobile processors.
Two memory sockets (located on the top and bottom side of the conga-TS170). Supports
SO-DIMM DDR4 (voltage @ 1.2V) modules
Data rates up to 2133 MT/s
Maximum 32 GB capacity (2x16 GB)
NOTE : Variants that feature the Intel CM236 chipset support ECC memory
Mobile Intel ® 100 Series Chipset QM170, HM170 and CM236 PCH
High definition audio interface with support for multiple codecs
Chipset
Audio
Ethernet
Graphics Options
Gigabit Ethernet support via the onboard Intel ® i219-LM GbE LAN controller (with AMT 11 support).
Gen9 HD Graphics engine. Supports full hardware accelerated video decoding/encoding for AVC, MPEG2, HEVC (8 bit), VP8, JPEG, hardware accelerated video processing/transcoding, DirectX 12, Direct3D 12, OpenGL 4.4, OpenCL 2.1 APIs and up to 3 independent displays.
NOTE : Variants equipped with Intel ® Xeon ® E3-1515MV5 feature the Intel ® Iris Pro Graphics.
1x LVDS
1x Optional eDP 1.3 interface (assembly option) .
3x DDIs (Digital Display Interfaces). Supports:
3x DisplayPort 1.2
with support for Multi-Stream Transport (MST)
3x HDMI 1.4 (requires external level shifter)
3x DVI port (requires external level shifter)
Resolutions up to 4K and support for Hot Plug Detect
Peripheral Interfaces USB Interfaces:
Up to 8x USB 2.0
Up to 4x USB 3.0
4x Serial ATA ® 6Gb/s with RAID support 0/1/5/10
8x PCI Express ® Gen. 3 lanes
2x UART
1x VGA support
1x PEG Gen 3 port (x16 lanes)
NOTE :
To support HDMI/DVI, an external level shifter should be implemented on the user’s carrier board.
To support HDMI 2.0 via the DDI, a Level Shifter Protocol
Converter (LSPCON) is required on the carrier board.
I²C bus (fast mode, 400 kHz, multi-master)
LPC bus (no DMA)
SM Bus
SPI
GPIOs
BIOS AMI Aptio ® UEFI 5.x firmware, 8/16 MByte serial SPI with congatec Embedded BIOS features
Power Management ACPI 5.0
compliant with battery support. Also supports DeepSx and Suspend to RAM (S3).
congatec Board
Controller
Multi-stage watchdog, non-volatile user data storage, manufacturing and board information, board statistics, hardware monitoring, fan control, I²C bus, power loss control .
Security Optional discrete Trusted Platform Module “TPM 1.2/2.0”; AES Instructions .
14/132
advertisement
Related manuals
advertisement
Table of contents
- 11 1 Introduction
- 14 2 Specifications
- 14 Feature List
- 15 Supported Operating Systems
- 15 Mechanical Dimensions
- 16 Supply Voltage Standard Power
- 16 Electrical Characteristics
- 16 Rise Time
- 17 Power Consumption
- 18 Supply Voltage Battery Power
- 19 Environmental Specifications
- 20 Block Diagram
- 21 Cooling Solutions
- 21 CSA Dimensions
- 22 CSP Dimensions
- 23 4.3 Heatspreader
- 25 Heatspreader Thermal Imagery
- 26 Onboard Temperature Sensors
- 28 Connector Rows
- 28 Primary Connector Rows A and B
- 28 Serial ATA™ (SATA)
- 28 High Definition Audio (HDA) Interface
- 29 Gigabit Ethernet
- 29 LPC Bus
- 29 I²C Bus Fast Mode
- 29 PCI Express
- 30 6.1.8 ExpressCard
- 30 6.1.9 VGA
- 30 6.1.10 LVDS/eDP
- 31 General Purpose Serial Interface
- 31 6.1.12 GPIOs
- 31 Power Control
- 35 Power Management
- 36 Secondary Connector Rows C and D
- 36 PCI Express
- 36 PCI Express Graphics (PEG)
- 37 Digital Display Interface
- 38 6.2.3.1 HDMI
- 38 6.2.3.2 DVI
- 38 DisplayPort (DP)
- 40 Additional Features
- 40 congatec Board Controller (cBC)
- 40 Board Information
- 40 7.3 Watchdog
- 40 C Bus
- 40 Power Loss Control
- 41 OEM BIOS Customization
- 41 OEM Default Settings
- 41 OEM Boot Logo
- 41 OEM POST Logo
- 41 OEM BIOS Code/Data
- 42 OEM DXE Driver
- 42 congatec Battery Management Interface
- 42 API Support (CGOS)
- 43 Security Features
- 43 Suspend to Ram
- 44 conga Tech Notes
- 44 PCH Features
- 44 Rapid Storage Technology
- 44 8.1.1.1 AHCI
- 44 8.1.1.2 RAID
- 44 Smart Response Technology
- 45 Processor Features
- 45 Turbo Boost Technology
- 46 Processor Performance Control
- 47 64 Architecture
- 47 Virtualization Technology
- 48 Thermal Management
- 49 ACPI Suspend Modes and Resume Events
- 49 DDR4 Memory
- 50 Signal Descriptions and Pinout Tables
- 51 A-B Connector Signal Descriptions
- 60 A-B Connector Pinout
- 62 C-D Connector Signal Descriptions
- 71 C-D Connector Pinout
- 73 Boot Strap Signals
- 74 System Resources
- 74 I/O Address Assignment
- 74 LPC Bus
- 75 PCI Configuration Space Map
- 76 SM Bus
- 77 BIOS Setup Description
- 77 Entering the BIOS Setup Program
- 77 Boot Selection Popup
- 77 Setup Menu and Navigation
- 78 Main Setup Screen
- 79 Platform Information Submenu
- 80 Advanced Setup
- 81 Graphics Submenu
- 85 Display Interface Signal Integrity Settings Submenu
- 86 Watchdog Submenu
- 88 Module Serial Ports Submenu
- 89 Hardware Health Monitoring Submenu
- 90 Ethernet Connection (H) I219-LM Submenu
- 90 NIC Configuration Submenu
- 90 Driver Health Submenu
- 91 Trusted Computing Submenu
- 91 RTC Wake Settings Submenu
- 91 ACPI Submenu
- 92 ICC Submenu
- 93 AMT Configuration Submenu
- 94 PCH-FW Configuration Submenu
- 94 SMART Settings Submenu
- 95 Super IO Submenu
- 95 Serial Port Console Redirection Submenu
- 96 11.4.15.1 Console Redirection Settings Submenu
- 97 CPU Submenu
- 101 Secure Erase Submenu
- 101 SATA Submenu
- 103 11.4.18.1 Software Feature Mask Configuration
- 104 Acoustic Management Submenu
- 104 PCI Express Configuration Submenu
- 105 11.4.20.1 BIOS Hot Plug Settings Submenu
- 106 PCI Express Configuration Submenu
- 107 11.4.21.1 PCI Express Gen3 Eq Lanes Submenu
- 107 11.4.21.2 PCI Express Settings Submenu
- 108 11.4.21.3 PCI Express GEN2 Settings Submenu
- 109 11.4.21.4 PCI Express Port 0 - 7 Submenu
- 111 11.4.21.5 PCI Express Graphics (PEG) Port Submenu
- 113 UEFI Network Stack Submenu
- 114 CSM & Option ROM Control Submenu
- 115 NVMe Configuration Submenu
- 115 SDIO Configuration Submenu
- 115 USB Submenu
- 116 Diagnostics Settings Submenu
- 117 PC Speaker Submenu
- 118 Chipset Setup
- 118 Processor (Integrated Components) Submenu
- 119 DMI/OPI Configuration Submenu
- 120 Memory Configuration Submenu
- 122 Platform Controller Hub (PCH) Submenu
- 123 Platform Thermal Configuration Submenu
- 124 Security Setup
- 124 Security Settings
- 124 BIOS Security Features
- 127 Hard Disk Security Features
- 128 Boot Setup
- 128 Boot Settings Configuration
- 130 Save & Exit Menu
- 131 Additional BIOS Features
- 131 Supported Flash Devices
- 131 Updating the BIOS
- 132 Industry Specifications