advertisement
6.1.8 ExpressCard™
The conga-TS170 supports the implementation of ExpressCards, which requires the dedication of one USB 2.0 port or a x1 PCI Express link for each ExpressCard used.
6.1.9 VGA
The Intel ® 6th Generation processor does not natively support VGA interface. The conga-TS170 however offers the VGA interface via an eDP to VGA converter, connected to the upper two data lanes on the embedded DisplayPort.
Note
To enable VGA interface, set the Digital Display Interface 3 to HDMI/DVI from the BIOS menu.
6.1.10 LVDS/eDP
The conga-TS170 offers an LVDS interface with optional eDP overlay on the AB connector. The LVDS/eDP interface is by default configured to provide LVDS signals. The interface can optionally support eDP signals via a hardware change (assembly option).
The LVDS interface supports:
• single or dual channel LVDS (color depths of 18 bpp or 24 bpp)
• integrated flat panel interface with clock frequency up to 112 MHz
• VESA and OpenLDI LVDS color mappings
• automatic panel detection via Embedded Panel Interface based on VESA EDID TM 1.3
• resolution up to 1920x1200 in dual LVDS bus mode
Note
The LVDS/eDP interface supports either LVDS or eDP signals. Both interfaces are not supported simultaneously.
30/132
advertisement