F200/F300 Camera Parameters. Omron F250-C50 C55 - SETUP 09-2001, F250-C55, F250-C50
Add to My manuals86 Pages
advertisement
![F200/F300 Camera Parameters. Omron F250-C50 C55 - SETUP 09-2001, F250-C55, F250-C50 | Manualzz F200/F300 Camera Parameters. Omron F250-C50 C55 - SETUP 09-2001, F250-C55, F250-C50 | Manualzz](http://s2.manualzz.com/store/data/062044997_1-da6dfeec9dc2cfd365e0a53c30c58e3e-360x466.png)
F200/F300 Camera Parameters
Memory Cards
F160-N64S
42.8
3.3
Unit: mm
Section 5-5
Item Specification
Ambient temperature Operating: 0 to 60
C (with no condensation)
Storage:
-
25 to 85
C (with no condensation)
Ambient humidity 8% to 95% (with no condensation)
Ambient environment No corrosive gases
Life expectancy 300,000 overwrite operations
Number of pins
Weight
50 pins
Approx. 15 g
Application Software
F250-UME
42.8
Units: mm
3.3
Item Specification
Ambient temperature Operating: 0 to 60
C (with no condensation)
Storage:
-
25 to 85
C (with no condensation)
Ambient humidity 8% to 95% (with no condensation)
Ambient environment No corrosive gases
Life expectancy 300,000 overwrite operations
Number of pins
Weight
50 pins
Approx. 15 g
5-5 F200/F300 Camera Parameters
Detailed parameter settings are required when a Camera other than an F150-
S1A or F160-S1 is connected. Make the following settings when using an
F200/F300 Camera. The Camera settings window is displayed at startup and
68
F200/F300 Camera Parameters Section 5-5 can be displayed at other times by selecting Camera settings from the System Menu.
Camera settings
Camera : Others
Intelligent Lighting 0:
Out of use
Intelligent Lighting 1:
Out of use
Intelligent Lighting 2:
Out of use
Intelligent Lighting 3:
Out of use
End
Set the Camera model to "Others" and select
"End".
Camera settings(Detail)
Camera Speed :
Shutter : SYNC RESET
Synchronization : External
Strobe disable, start
Strobe disable, end
Clamp pulse timing
Clamp pulse width :
:
:
:
Normal
[ 0]H
[ 0]H
[ 90]CLK
[ 25]CLK
Shutter trigger width : [ 3]H
End
Camera
Camera speed
F200-
S
F300-
S
F300-
S2R
Standard
Standard
Standard
F300-
S3DR
Standard
F300-
S4R
Standard
Shutter
OFF
OFF
SYNC
NON
RESET
SYNC
NON
RESET
SYNC
NON
RESET
Synchronization
Strobe disable
Start End
Internal
External
External
10
6
External
External
17
8
(None)
(None)
-
8
-
2
-
2
-
2
-
0
0
0
6
-
10
-
8
-
2 0
3 5
1/1,000
1/2,000
1/4,000
1/10,000
1/1,000
1/2,000
1/4,000
5 7 1/10,000
-
5
-
3
-
3
-
2
-
16
-
14 1/1,000
-
11
-
9 1/1,500
-
8
-
6
-
-
6
4
1/2,000
1/3,000
-
3
-
1
-
1
1/4,000
1/6,000
1/8,000
0 1/10,000
-
2
-
2
0
0
1/30,000
1/50,000
Shutter speed
1
Clamp pulse
Timing
60
90
90
25
25
Shutter trigger pulse
Width Width Polarity
20 (Note
2)
(Note
2)
7
Positive
Positive
Negative
External
VD
Sync
3
OFF ---
OFF ---
OFF ---
Image read Y timing
3
90
90
25
25
7
7
Negative
OFF ---
Negative
OFF ---
Note 1.
The shutter speed is set in the Camera itself.
2.
Set the shutter trigger pulse width to match the strobe’s specifications only when a strobe is being used.
3.
These settings (indicated by ---) are ignored.
69
advertisement
Related manuals
advertisement
Table of contents
- 13 Introduction
- 14 Installation Precautions
- 18 Confirming Package Contents
- 18 Product Availability
- 19 Special Features, Installation, and Connections
- 20 Special Features
- 24 Basic System Configuration
- 26 Component Names and Functions
- 27 Mounting the Controller
- 29 Connecting Peripheral Devices
- 31 Power Supply and Ground
- 33 Lenses, Lighting, and Memory Cards
- 34 CCTV Lenses
- 37 Lighting
- 39 Memory Cards
- 41 Connecting External Devices
- 42 Connecting through the Parallel Interface
- 49 Connecting through the Serial Interface
- 55 Troubleshooting and Maintenance
- 56 Troubleshooting
- 58 Maintenance
- 61 Regular Inspections
- 62 Specifications
- 80 F200/F300 Camera Parameters
- 82 Connecting a Strobe Device
- 83 Index
- 85 Revision History