Controls. Harmar Mobility Pinnacle SL600
Harmar Mobility Pinnacle SL600 is a reliable stair lift that offers a safe and independent way to navigate stairs. With a weight capacity of 350 lbs, it smoothly glides up and down stairs at a speed of 20 feet per minute. The Pinnacle SL600 features a range of safety measures, including sensitive edges that stop the lift if they touch an obstruction and an interlock that prevents operation if the seat is not properly positioned. The lift can be controlled using the armrest control or the wireless remote control for added convenience.
Advertisement
Advertisement
Pinnacle Stair Lift
Controls
• The red “ON/OFF” switch is located on top of the chassis. This switch is normally left in the “ON” position (I).
This switch can be turned “OFF” if you do not expect to use the lift for an extended period of time. Ensure that the lift is in the charging position.
• The main “UP/DOWN” control switch is located at the front of one armrest. Use this switch for normal operation of the lift while in a seated in a secure position.
• There are “UP” and “DOWN” buttons on the remote call/send hand control units.
• There is a three-color LED indicator light on one armrest.
• Units equipped with a key switch located at the back of one armrest. Turn this off and remove the key when you want to ensure the lift cannot be used in your absence.
Stair Lift Operation
Step 1 : To turn the stair lift on, press the red “ON/OFF” switch located on the top of the carriage to the “ON” position (I) and ensure that the key switch (if equipped) is “ON.” When the lift is turned “ON” a green light on the armrest will indicate that the lift is ready for use.
WARNING
Do not carry pets or children on your lap while riding the stair lift. The lift is designed for use by only one person at a time.
Step 2: To aid entry to the chair, the armrest on the entry side may be raised. When positioning yourself on the seat at the upper landing, ensure the seat is fully swiveled and locked in position for safety. The seat may be swiveled by depressing the swivel release handle on either side of the seat.
WARNING
Never attempt to operate the lift while standing up. Always sit in the center of the seat with the seat belt fastened around your waist.
Step 3: Ensure that you are securely seated and armrests are in down position before operating the lift. To operate the lift, continuously press the hand control switch on the side in which you wish to travel.
WARNING
Keep your feet centered on the footrest while traveling up and down the stairs.
Never dangle your feet off the footrest while riding the lift.
TEC0004 20160302 P/N: 610-00003-01 Rev A SL600 • Pinnacle Stair Lift Owner's Manual 5
6
Pinnacle Stair Lift
Stair Lift Operation (cont)
Step 4: If you release the control switch the lift will stop. Continue to press the switch or button all the way to the landing. The lift will gently stop at the appropriate, preset point.
Step 5 : To safely exit the lift, support yourself by the armrests, rise and step off the footrest. At the upper landing, ensure that the seat is fully swiveled and locked before rising. If you do not intend to use the lift again immediately, the seat and armrests may be folded up to minimize obstruction to people walking on the stairs.
WARNING
When transferring in or out of the seat use the armrests to assist you. Ensure the seat is securely latched before transferring in or out.
Step 6: To operate the lift remotely, continuously press the appropriate up or down button on the call/send hand control unit. Like all infrared devices, the signal may be interrupted if the hand control unit is not in the line of sight of the stair lift. If this happens the lift may temporarily stop but restart immediately, as long as the hand remote is pressed continuously.
If you are operating the lift remotely on behalf of another person, please ensure that they are securely seated with the seat belt engaged. Always keep the person in line of sight before commencing movement.
NOTE: An amber light and single beep indicate that the lift has touched an obstruction and may only be operated in the opposite direction of the obstruction. Clear the obstruction before proceeding.
If the light flashes orange and the lift beeps intermittently, the lift has been stopped away from the top or bottom charging stations. Please move the lift to either end of the rail to ensure the batteries remain fully charged.
The LED indicator light will turn red if there is a service issue. Turn the “ON/OFF” switch to the “OFF” position
(O) and then back to the “ON” position (I). The lights should sequence red-amber-green. If the light does not return to green, please call your service representative.
| www.harmar.com
© 2016 Harmar Mobility, LLC • All Rights Reserved
Download
Advertisement