Powering Up The 7535 And Configuring The Radio. Psion GM3WCF2011BE, 7535 Hand-Held Computer

Chapter 2: Unpacking & Basic Checkout

Attaching The Hand Strap

Important: Do not use adhesives such as Loctite to secure the screws on the carrying accessories. These chemicals may damage the plastic casing.

2.1.3.1

Attaching The Hand Strap

Note: A Phillips head screwdriver is required.

Psion Teklogix recommends that the hand strap provided with your 7535 always be used. However, if your unit has an internal scanner and you plan to use the pistol grip accessory, a hand strap is not required.

Two Phillips head screws are provided with the hand strap.

• Attach the strap to the two threaded inserts located at the back of the 7535 near the top of the unit.

Figure 2.1 Attaching The Hand Strap

14 Teklogix 7535 Hand-Held Computer User Manual