Chapter 2: Unpacking & Basic Checkout
Configuring WEP Keys
Important: To add or modify a WEP Key in an EXISTING network:
• In the ‘preferred network’ list (see Figure 2.15 on page 26), highlight the network in which you want to add or modify a
WEP key, and then
• RATHER THAN SELECTING THE <Add...> BUTTON, select the <Properties> button.
6. Press <TAB> until
‘Data encryption (WEP enabled)’
<SPACE> key to enable (
√
) this option.
is highlighted. Press the
7. To define your own WEP keys, press the <TAB> key to highlight
‘The key is provided automatically’
. Press <SPACE> to deselect the checkbox.
8. Press the <TAB> key to highlight the <Modify WEP Keys...> button, and press <ENTER>.
Figure 2.17 WEP Key Settings
9. Press the <TAB> key to move from field to field in this dialogue box.
Network key:
Used to specify a 5 or 13 ASCII character sequence or an equivalent 10 or 26 Hexadecimal digit sequence that matches the active WEP key on the access point.
Teklogix 7535 Hand-Held Computer User Manual 27
