50 Description of the inDicator, warning anD control elements
4.2
Control and warning indicator lights
•
If the indicator lights do not illuminate properly at the starting sequence, repair the malfunction before operating the machine.
•
If an indicator light illuminates during operation, move the machine to a safe place, lower the loader arms and stop the engine.
•
Do not operate the wheel loader until the reason for the illuminated indicator is determined and corrective action has been completed.
Immediately turn off the engine if a light marked with this * symbol is illuminated in the adjacent table.
1 2 3 4
5
6 7 8
1
Fig. 13 Control and warning lights
0
1
2
3
W L 36
Description of the inDicator, warning anD control elements 51
Item Designation Function Symbol
1 Heater indicator light Illuminates during preheating
2
Indicator light for electrical connection on loader lift arms (optional equipment)
3
Warning light for return filter
Illuminates when electrical connection is switched on.
Illuminates if the pressure at the return filter is too high
4 No function
1
5 Indicator for fuel display
6 *
Warning light for engine temperature / hydraulic oil temperature
7 Warning light for alternator
8 Indicator light for turn signal
Available for optional equipment
Illuminates when the fuel quantity falls to approx. 5 l (1.6 gallons)
Illuminates when engine temperature / hydraulic oil temperature is too high
Is illuminated if the battery is not accepting an electrical charge
Illuminates when a turn signal is on
52 Description of the inDicator, warning anD control elements
Control and warning indicator lights
•
If the indicator lights do not illuminate properly at the starting sequence, repair the malfunction before operating the machine.
•
If an indicator light illuminates during operation, move the machine to a safe place, lower the loader arms and stop the engine.
•
Do not operate the wheel loader until the reason corrective action has been completed.
Immediately turn off the engine if a light marked with this * symbol is illuminated in the adjacent table.
9 10 11
12
13 14 15 16
Fig. 13 Control and warning lights
0
1
2
3
W L 36
Description of the inDicator, warning anD control elements 53
Item Designation Function Symbol
9 Indicator light for main beam Illuminates when the main beam is switched on
10 * Warning light for engine oil pressure Illuminates when engine oil pressure is too low
11 Indicator light for parking brake
12
Air filter indicator light
13 Indicator light for overdrive
14 Indicator light for crawler gear
15 Indicator light for forward drive
16 Indicator light for reverse drive
Illuminates when the parking brake is on
Illuminates when the air filter is contaminated.
Illuminates when overdrive is engaged
Illuminates when crawler gear is engaged
Illuminates when gear is set to forward drive
Illuminates when gear is set to reverse drive
