78 Ope r ating a nd Ope r atiOn
5.2.3 Headlights and rotating beacon
WARNING
Personal injury or property damage hazard. Working and driving lights can blind passing motorists.
►
Do not drive on public roads with working lights illuminated.
► Confirm that the driving lights are aimed to avoid blinding oncoming traffic.
The loader is equipped with headlights and taillights.
11 12
The switches for switching on the headlights are located
in the cab to the right above the operator‘s seat (Fig. 33).
Switch the headlights on/off with the rocker switches Items
11 and 12.
Front headlights:
•
Put the rocker switch Item 11 in position 1:
–
The headlights switch on.
•
Put the rocker switch Item 11 in position 0:
–
The headlights switch off.
14 15
0 Position
1 Position
Fig. 33
Headlight and rotating beacon switches
Rear headlights:
Operate the taillights using the rocker switch
Item 12 (Fig. 33) the same way you would the front
headlights.
W L 36
Ope r ating a nd Ope r atiOn 79
The rotating beacon
(optional equipment)
Rear window heating
Use the yellow rotating beacon according to local regulations.
The loader has a heated rear window. With this heater, you can keep the rear window free of ice in cold weather.
If you want to use a rotating beacon, mount it on the fastener
provided (Fig. 5).
The switch for switching on the rear window heater is located
in the cab above the operator‘s seat (Fig. 33). Switch the
rear window heater on/off with the rocker switch Item 14.
The switch for operating the rotating beacon is located in
the cab above the operator’s seat (Fig. 33).
•
Put the rocker switch Item 15 in position 1:
–
The rotating beacon switches on.
•
Move the rocker switch Item 14 into position 1:
–
The rear window heater is switched on.
•
Move the rocker switch Item 14 into position 0:
–
The rear window heater is switched off.
•
Put the rocker switch Item 15 in position 0:
–
The rotating beacon switches off.
