Type 8681 büS/CANopen
Accessories
7 ACCESSORIES
CAUTION!
Risk of injury and/or damage due to the use of unsuitable parts
Incorrect accessories and unsuitable spare parts may cause injuries and damage the device and the surrounding area.
` Use only original accessories and original spare parts from Bürkert.
Accessories Figure Order / ID no.
Switching power supply Type 1573 to power the CAN sub-system
(Note: only ID no. 772898 conforms to NEC Class 2
(all ID no. of Type 1573 conform to the EU standards 2014/35/EU - LVD and 2014/30/EU - EMC)
3.8 A nominal output current
(conforms to “NEC Class 2”)
772898
1 A nominal output current 772361
2 A nominal output current 772362
10 A nominal output current 772698
Gateway ME43 (also an SD card for the gateway)
(connection between büS/CANopen (Bürkert) and Ethernet/IP (Rockwell Automation));
316696
(gateway) preconfigured and designed for the connection/control of up to 63 Control Heads Type 8681 (büS)
774087
(SD card)
Other pre-configurations e.g. in conjunction with Control
Heads Type 8691, Positioners Type 8692 or Process Controllers Type 8693 on request.
Cables and connections (büS/CANopen) developed for application in environments with “hygienic requirements”
(degree of protection: IP65/67 | materials: Metal parts - stainless steel, cable sheath - PVC | U = 24 V DC,
I = max. 4 A; required tightening torque for the required leak-tightness against moisture: 0.6 Nm + 0.1 Nm )
Connection cable with flying leads and M12 plug *) , length 1 m
(for the connection of büS control heads with cable glands)
218187
54
Connection cable with flying leads and M12 socket *) , length 1 m
Connection cable with flying leads and M12 socket *) , length 3 m
Extension cable, M12 plug + M12 socket *) , length 0.5 m
Extension cable, M12 plug + M12 socket *) , length 1 m
Extension cable, M12 plug + M12 socket *) , length 3 m
Extension cable, M12 plug + M12 socket *) , length 5 m
Extension cable, M12 plug + M12 socket *) , length 10 m
Extension cable, M12 plug + M12 socket *) , length 20 m
773482
773483
773484
773485
773486
773487
773488
773489 english
Type 8681 büS/CANopen
Accessories
Accessories
CAN terminating resistor, M12 plug *) , 120 Ω
CAN terminating resistor, M12 socket *) , 120 Ω
CAN Y-connector, M12 *)
Figure Order / ID no.
773490
773491
773492
CAN T-connector, M12 *)
Mounting plate for CAN T-connector (M12)
773493
773494
Protective cap for M12 socket for closing unnecessary (open) connections
(10 protective caps per pack)
Protective cap for M12 plug including O-ring 8 x 2 N-NBR 70
(10 caps and 10 O-rings per pack) for closing unnecessary (open) connections
CAN junction box, M12 *) for connection up to 8 devices to the bus
(6 connections have already been closed with appropriate protective caps)
308778
308785
338398
*) Required tightening torque for all plug-in connections (cables, T-pieces, ...) to ensure the required leaktightness against moisture: 0.6 Nm + 0.1 Nm.
Alternatively, DeviceNet cabling components (e.g. from Rockwell Automation) can also be used. However, they must comply with the necessary requirements when used in the “Hygenic area”, because not all of these parts have the required quality such as stainless steel or PP or PPE or PVC.
Service tool
USB büS interface set:
büS standard set (büS stick + 0.7 m cable with M12 plug)
büS adapter for büS service interface (M12 on büS service interface Micro-USB)
büS cable extensions from M12 plug to M12 socket (not for “hygienic requirements”)
Extension cable, length 1 m
Extension cable, length 3 m
Extension cable, length 5 m
Extension cable, length 10 m
Equipment case “USB-büS-Interface Set1”
Order / ID no.
772551
773254
772404
772405
772406
772407
772426
55 english
8 CABLING EXAMPLES
Type 8681 büS/CANopen
Cablingexamples
56 english
Type 8681 büS/CANopen
Cablingexamples english
57
58 english
Type 8681 büS/CANopen
Cablingexamples
Type 8681 büS/CANopen
english
59
www.burkert.com
