LIS331DLM
2.4
Mechanical and electrical specifications
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device under these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
Table 7.
Symbol
Absolute maximum ratings
Ratings
Vdd Supply voltage
Vdd_IO I/O pins supply voltage
Vin
Input voltage on any control pin
(CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)
Maximum value
-0.3 to 6
-0.3 to 6
Unit
V
V
V
A
POW
A
UNP
T
OP
T
STG
ESD
Acceleration (any axis, powered, Vdd = 2.5 V)
Acceleration (any axis, unpowered)
Operating temperature range
Storage temperature range
Electrostatic discharge protection
-0.3 to Vdd_IO +0.3
3000 g
for 0.5 ms
10000 g for 0.1 ms
3000 g
for 0.5 ms
10000 g
for 0.1 ms
-40 to +85
-40 to +125
4 (HBM)
1.5 (CDM)
200 (MM)
°C
°C kV kV
V
Note: Supply voltage on any pin should never exceed 6.0 V
This is a mechanical shock sensitive device, improper handling can cause permanent damages to the part
This is an ESD sensitive device, improper handling can cause permanent damages to the part
Doc ID 15102 Rev 4 13/38
