4.3 Industrial PoE+ Injector Upper Panel. Planet IPOE-162

4.3 Industrial PoE+ Injector Upper Panel

The upper panel of the Industrial PoE+ Injector consists of one terminal block connector within two DC/AC power inputs. Figure 1 shows the upper panel of the Industrial PoE+ Injector.

1 2 3 4 5 6

Figure 4-3 : Industrial PoE+ Injector Upper Panel

4.4 Wiring the Power Inputs

The 6-contact terminal block connector on the top panel of Industrial

PoE+ Injector is used for two DC/AC redundant power inputs. Please follow the steps below to insert the power wire.

1. Insert the positive and negative DC power wires or neutral/Line AC power wires into Contacts 1 and 2 for Power 1, or 5 and 6 for Power

2.

1 2 3 4 5 6

Figure 4-4: Power Input Pins

10