Uninstalling the Base. Britax B-Safe Gen2 FlexFit, B-Safe Gen2 FlexFit Plus

B-SAFE GEN2 FLEXFIT & FLEXFIT PLUS User Guide

Uninstalling the Base

LUAS Installation

1. Press the lower connector release button on the top of the base to loosen the straps.

2. Press each of the red release buttons on the lower connectors and release vehicle anchors.

3. Store the lower connectors in the storage slots in the base until reinstalling. Pull on the lower connector straps in center of base to remove slack.

Lap Shoulder Belt Installation

1. Unbuckle the vehicle belt and remove from the lock-off. Pull the belt from the base belt guides.

Lap Belt Installation

1. Unbuckle the vehicle belt and pull the belt from the base belt guides.

19