OPERATING INSTRUCTIONS. Sea-doo XP DI

OPERATING INSTRUCTIONS

Variable Trim System

The variable trim system (VTS) changes the angle of the jet pump nozzle to provide the operator with a fast, effective system to compensate for load, thrust, riding position and water conditions. Correctly adjusted, it can improve handling, reduce porpoising, and position the watercraft at its best riding angle to attain maximum performance.

When first using the watercraft, the operator should become familiar with the use of the variable trim system (VTS) at varying speeds and water conditions. A mid-range trim is generally used when cruising. Experience alone will dictate the best trim for the conditions. During the watercraft break-in period, when lower speeds are recommended, it is an excellent opportunity to gain familiarity of trim adjustment and its effects.

When the nozzle is positioned in an upward angle, the water thrust directs the bow of the watercraft upward. This position is used to optimize high speed.

2

1

8°

F08J0AY

3

TYPICAL

1. Push on arrow pointing upward on VTS button

2. Bow up

3. Nozzle up

10

1

2

8°

F08J0BY

3

TYPICAL

1. Push on arrow pointing downward on VTS button

2. Bow down

3. Nozzle down

11