MAINTENANCE. Sea-doo GTX, GTX DI

smo2002-005a.book Page 11 Friday, September 7, 2001 11:34 AM

MAINTENANCE

Fuses

It is the same information as explained in the 2002 Operator’s Guide except for the following. Refer to the updated text and illustrations.

MPEM

To access fuses on the MPEM, remove seat.

Locate MPEM besides engine.

1 2

2

F1 : FP 15A

F2 : ACC 2A

F3 : REG 25A

F4 : VTS 7.5A

F5 : BAT 25A

F6 : INJ 15A

1

F1 F2 F3 F4 F5 F6

F18H05Y

1. MPEM

2. Fuses location

Fuses are identified, look above and besides the fuse holder.

F18H06Y

FUSE IDENTIFICATION

1. Fuse identification

2. Fuse description

Fuse identification: The fuses (F) are identified from 1 to 6.

Fuse description: The fuses are described with abbreviation as follows:

FP: Fuel pump

ACC: Accessories (information center)

REG: Regulator (charging system)

VTS: Variable Trim System. Fuse is installed but not in use on the GTX DI model

BAT: Battery

INJ: Injection system

The fuse description is followed by the ampere rating (A).

11

smo2002-005a.book Page 12 Friday, September 7, 2001 11:34 AM

Rear Electrical Box

Remove seat.

Locate electrical box at the back of the bilge.

F18H01Y

1. Electrical box

1

Unclip and remove cover of the electrical box to expose the holder of the main fuse.

1

F18H02Y

TYPICAL

1. Fuse holder

Properly reinstall removed components.

12