advertisement
SAFETY PRECAUTIONS
GENERAL SAFETY RULES FOR OPERATING MACHINERY
CAUTION:
As with all machinery, there are certain hazards involved with their operation and use. Exercising respect and caution will considerably lessen the risk of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator or damage to property may result.
• READ and BECOME FAMILIAR with the entire operating manual. Learn the machine’s applications and limitations as well as the specific potential hazards peculiar to it.
• EARTH ALL MACHINES. If the machine is equipped with a three-pin plug, it should be plugged into a three-pin electrical socket. Never remove the earth pin.
• ALWAYS ensure that ADEQUATE LIGHTING is available. A minimum intensity of
300 lux should be provided. Ensure that lighting is placed so that you will not be working in your own shadow.
• CHECK for DAMAGE. Before using the machine, any damaged part, such as a guard etc., should be checked to ensure that it will operate properly, and perform its intended function. Check for alignment of moving parts, breakage of parts, mountings and any other condition that may affect the machine’s operation. Any damage should be properly repaired or the part replaced. If in doubt, DO NOT USE the machine. Consult your local dealer.
• DISCONNECT the MACHINE from the power supply before servicing and when changing accessories such as blades, etc.
• KEEP GUARDS in place and in working order.
• ALWAYS WEAR SAFETY GOGGLES, manufactured to the latest European Safety
Standards. Also use face or dust mask if cutting operation is dusty.
Everyday eyeglasses do not have impact resistant lenses, they are NOT safety glasses.
• KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
• ALWAYS WEAR EAR PROTECTORS/DEFENDERS.
• DON’T FORCE the machine, it will do a better and safer job at the rate for which it was designed.
• REMOVE ADJUSTING KEYS AND WRENCHES. Form the habit of checking to see that keys and adjusting wrenches are removed from the machine before switching on.
3
• DRUGS, ALCOHOL, MEDICATION. Do not operate machine while under the influence of drugs, alcohol or any medication.
• USE RECOMMENDED ACCESSORIES. The use of improper accessories could be hazardous.
• NEVER LEAVE MACHINE RUNNING UNATTENDED. Turn power OFF. Do not leave machine until it comes to a complete stop.
• ALWAYS REMOVE PLUG from electrical outlet when adjusting, changing parts, or working on machine.
• AVOID DANGEROUS ENVIRONMENT. Don’t use power machines in damp or wet locations or expose them to rain. Keep your work area well illuminated.
DO NOT USE in explosive atmosphere (around paint, flammable liquids etc.).
• KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work area, especially whilst operating the unit.
• MAINTAIN MACHINE IN TOP CONDITION. Keep tools sharp and clean for the best and safest performance. Follow maintenance instructions.
• DON’T OVERREACH. Keep your proper footing and balance at all times. For best footing, wear rubber soled footwear. Keep floor clear of oil, scrap wood, etc.
• WEAR PROPER APPAREL. Loose clothing or jewellery may get caught in moving parts. Wear protective hair covering to contain long hair.
• MAKE WORKSHOP CHILDPROOF. Cover the saw adequately when not in use, to prevent children from damaging themselves by tampering with it.
• NEVER STAND ON THE MACHINE. Serious injury could occur if the machine is tipped or if a cutting tool is accidentally contacted. Do not store materials above or near a machine, such that it is necessary to stand on the machine to reach them.
• HANDLE WITH EXTREME CARE. Whenever transporting or installing machinery, and always use a lifting device.
• BE AWARE that many accidents are caused by carelessness due to familiarity.
ALWAYS concentrate on the job in hand, no matter how trivial it may seem.
4
advertisement