System Controller Installation. American Time SiteSync IQ Wired System

6

System Controller

Installation

TUE JUL 03 2018

10:38:06 AM USCT

American Time

Status=AUTO ETH=Y

SiteSync IQ Wired Installation Manual server rack

Shown with optional rack mount option, Part No. H004100

Back-UPS 600

1.5A

Battery + Surge

Surge

Part #H006238

1. Choose a suitable location for the System Controller, following the safety precautions on Page 1:

a. Place the System Controller indoors.

b. Locate near an electrical outlet (120vac).

c. Rack or shelf mount.

d. If you have a sync option, review the applicable installation guidelines included in this manual.

2. Connect the cables to the System Controller:

a. Connect the power supply to the POWER INPUT port.

b. Connect the power supply to 110v electrical supply (American Time recommends using surge protector/battery

backup Part # H006238 shown).

3. Turn on the power to the System Controller:

a. Place the rocker switch on the back of the unit to the ON position as shown above.

b. Confirm that the backlit display on the front of the unit lights up and displays text.

4. Follow the Setup Wizard instructions on pages 6-9.

© American Time