Installing accessories. Samsung CLX-8385ND, Samsung CLX-8385 Color Laser Multifunction Printer series

16

Installing accessories

Your machine is a full-featured model that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes several accessories available to enhance your machine’s capabilities.

This chapter includes:

•

Precautions to take when installing accessories

•

Installing a memory module

•

Replacing the Stapler

•

Enabling Fax feature after installing the fax option kit

Precautions to take when installing accessories

Disconnect the power cord

Never remove the control board cover while the power is being supplied on.

To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external accessories.

Discharge static electricity

The control board and internal accessories (network interface or DIMM) are sensitive to static electricity. Before installing or removing any internal accessories, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk round before finishing the installation, repeat this procedure to discharge any static electricity again.

Installing a memory module

Your machine has a dual in-line memory module (DIMM) slot. Use this memory module slot to install additional memory.

The order information is provided for optional memory module. (Page 15.1)

1

Turn the machine off and unplug all cables from the machine.

2

Open the control board cover by grasping it and slide toward you.

1

1

control board cover

3

Take out a new memory module from the plastic bag.

4

Holding the memory module by the edges, align the memory module on the slot at about a 30-degree tilt. Make sure that the notches of the module and the grooves on the slot fit each other.

5

Press the memory module into the slot with care until you hear a

'click'.

Note

The notches and grooves illustrated above may not match those on an actual DIMM and its slot.

6

Replace the control board cover.

7

Reconnect the power cord and printer cable, and turn the machine on.

16

.1

<Installing accessories>

Activating the added memory in the PS printer properties

After installing the memory DIMM, you need to select it in the printer properties of the PostScript printer driver in order to use it.

1

Make sure that the PostScript printer driver is installed on your computer. For details about installing the PS printer driver, see

Software section

.

2

Click the Windows

Start

menu.

3

For Windows 2000, select

Settings

and then

Printers

.

For Windows XP/2003, select

Printers and Faxes

.

For Windows 2008/Vista, select

Control Panel

>

Hardware and

Sound

>

Printers

.

For Windows 7, select

Control Panel

>

Hardware and Sound

>

Devices and Printers

.

For Windows Server 2008 R2, select

Control Panel

>

Hardware

>

Devices and Printers

.

4

Select the

Samsung CLX-8385 Series PS

printer.

Click the right mouse button on the machine icon and select

Properties

.

For Windows 7 and Windows Server 2008 R2, from context menus, select the

Printer properties

.

Note

If Printer properties item has

X

mark, you can select other printer drivers connected with selected printer.

5

Select

Device Settings

.

6

select the Installable Options section and set the necessary options.

7

Click

OK

.

Replacing the Stapler

When the stapler is completely empty, the message for installing the staple cartridge appears on the display screen.

1

Open the finisher cover.

2

Pull the stapler unit out.

3

Lift the empty staple cartridge from the stapler unit.

4

Unpack the new staple cartridge.

16

.2

<Installing accessories>

5

Place the staple cartridge back into the stapler unit.

6

Slide the stapler unit in until it locks in place.

7

Close the finisher cover.

Enabling Fax feature after installing the fax option kit

After installing the Fax kit, you have to set up the machine in order to use this function.

1

Press

Machine Setup

on the control panel.

2

Press

Admin Setting

.

3

When the login message appears, enter password with number keypad and press

OK

. (Page 3.5)

4

Press the

General

tab.

5

Press the

Country

.

Change the country, then some the values for fax and paper size will be changed automatically for your country.

16

.3

<Installing accessories>