Communication and Wiring
Ethernet Network Section 5.3
Ethernet Network
What Is in This Section?
This section contains the following topics:
Topic
Ethernet Network Topology
Ethernet Wiring
Modicon M258 Logic Controller - Ethernet Wiring
Magelis HMI GTO5310 - Ethernet Wiring
Harmony ZBRN1 Access Point - Ethernet Wiring
Page
169
170
171
172
173
168 8000DB1019 04/2014
Ethernet Network Topology
Ethernet Topology
#... node address
The subnet mask is: 255.255.255.0.
Optionally a PC can be linked to the Ethernet network.
Communication and Wiring
8000DB1019 04/2014
169
Communication and Wiring
Ethernet Wiring
Overview Ethernet
For more information, refer to Transparent Ready, User Guide, 31006929.
Cables
Reference
490NTW00002
490NTW00005
Designation
Ethernet ConneXium cable
- shielded twisted-pair straight cord
Description one RJ45 connector at each end
Position
1
Switch
Reference
TCSESU053FN0
Designation
Ethernet TCP/IP unmanaged switch
Cable Length
2.0 m (6.56 ft)
5.0 m (16.40 ft)
Description
10BASE-T/100BASE-TX - 5x RJ45 ports copper cable
Position
2
170 8000DB1019 04/2014
Communication and Wiring
Modicon M258 Logic Controller - Ethernet Wiring
Ethernet Port
PULL PULL
TM258
Eth LA
Eth ST
Eth NS
USB Host
MBS COM
CAN0 STS
MS
BATTERY
APP0
APP1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
2
1
TM258LF42DT
EthMAC Address : xx-xx-xx-xx-xx-xx
CAN0
Host
BATTERY (RTC)
Pgr Port
MBS Ethernet
RS485 / RS232
1
4
2
4
1
4
2
4
1
4
2
4
1
4
2
4
1
4
2
4
1
4
2
4
1
4
2
4
1
4
2
4
Characteristic
Standard
Connector type
Baud rate
Auto-crossover
Protocol supported
IP address negotiation type supported
Power over Ethernet
Description
Ethernet
RJ45
Supports Ethernet "10BaseT" and "100BaseTX" with autonegotiation
MDI / MDIX
No
SoMachine protocol
Modbus TCP client/server
Ethernet/IP adapter
FTP server
HTTP server
SNMP
DHCP
BOOTP
Fixed IP
8000DB1019 04/2014
171
Communication and Wiring
Magelis HMI GTO5310 - Ethernet Wiring
Ethernet Port
The Ethernet connection is used for the communication between the controller and the HMI. The
Magelis panel HMI GTO provides an RJ45 port for Ethernet TCP/IP link, 10BASE-T/100BASE-TX with an activity LED to communicate with the controller and the PC.
1 RJ45 connector
172 8000DB1019 04/2014
Communication and Wiring
Harmony ZBRN1 Access Point - Ethernet Wiring
Ethernet Port
The Ethernet connection is used to exchange data between several devices connected together on a network.
The ZBRN1 access point is equipped with a plugged-in ZBRCETH communication module which provides 2 RJ45 plugs.
The communication module supports the Ethernet Modbus/TCP protocol.
It enables daisy chain wiring between devices without using a switch.
1 ZBRN1 access point
2 ZBRCETH communication module with 2 RJ45 plugs
8000DB1019 04/2014
173
