Configuring the Connection with EcoStruxure Machine
Advisor
After you have created your project in EcoStruxure Augmented Operator Advisor Builder, and associated the project to a machine type in EcoStruxure Machine Advisor, connect the
EcoStruxure Augmented Operator Advisor Runtime to EcoStruxure Machine Advisor if you want to use the EcoStruxure Machine Advisor documents in your project.
If you are using a proxy:
Step
1
2
3
Action
Launch the EcoStruxure Augmented Operator Advisor Runtime and click Settings .
Enter the address of your proxy in the Https Proxy field.
Click Apply and wait until the confirmation message appears.
To configure the connection with EcoStruxure Machine Advisor:
Step
1
2
3
4
5
6
Action
Launch EcoStruxure Machine Advisor and open the FLEET OVERVIEW , then open the machine that you want to connect.
On the machine page, click CONNECT EDGE , then copy the One Time Password code that appears.
Launch the EcoStruxure Augmented Operator Advisor Runtime and click Settings .
Click Connect under EcoStruxure Machine Advisor.
Result: The Connect dialog box opens.
Enter the One Time Password code.
Click Connect .
Result: The EcoStruxure Augmented Operator Advisor Runtime is connected to EcoStruxure
Machine Advisor.
Configuring Users and Security Settings
Overview
There are three types of users of EcoStruxure Augmented Operator Advisor:
• Builder users
EIO0000003000.12
37
