PLC simulation window. Schneider Electric XBTF / TXBTF Graphic terminals (Tome 2)

10. Application simulation

PLC simulation window

Three tabs can be used to simulate:

- The displayed page variables (initially, a random value is allocated) by selecting each variable field cell, its value can be modified from the

PC keyboard as it would have changed from the PLC.

- The alarm tables by clicking twice on each alarm bit, its state is changed from 0 to 1 and vice-versa.

- The dialog table. Refresh of this window can be inhibited, to enable input of a page change, etc. The way to modify the dialogue table variables is the same used to modify the displayed page variables.

B - 60 Graphic Magelis