Controlling your PTZ Camera. Swann 1080P 8CH X4 CAMERA DVR 1TB KIT, SWDVK-846804SL-EU

Controlling your PTZ Camera

16/05/2017 04:30:15 PM

CH2

1 2

6 5

3

4

To move the PTZ controls, click and hold then reposition it.

A Swann Pro-1080PTZ camera has been used in the example provided.

This model is compatible with the 4480 series of DVRs.

To control your PTZ camera, in Live View mode click on the channel the camera is connected to then click the “PTZ” button located on the camera toolbar. The channel will go full screen and the PTZ controls will be visible (as shown on the left).

1.

If you have multiple PTZ cameras connected, click this to select a different camera.

2.

Click this to start cruise mode (preset positions must be created first).

Cruise mode instructs your DVR to automatically move the camera according to the preset positions that have been created. Click again to stop cruise mode.

3.

Adjust the speed control to alter how fast or slow the camera will pan or tilt. Move the slider to decrease or increase the speed.

4.

Click this to access the Preset panel. This allows you to create multiple preset positions and to access the camera’s on-screen display. Click again to close.

5.

This allows you to zoom into an object and to control the level of focus (depending on the camera you have, the iris control may not be available).

6.

Click the directional buttons to move the camera in the direction selected

(the middle button has no function).

For instructions on how to create a preset and to access the camera’s on-

screen display (see page 27 - Creating a Preset).

Click for contents

26