Stopping Engine. Echo SRM-3020T

SRM-3020T

2.

Purge Bulb

Pump purge bulb (B) until fuel is visible in the “Clear” fuel return line. Pump bulb an additional four or five times.

B

OPERATION

3.

Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Firmly grip throttle handle and throttle trigger lockout with left hand.

Rapidly pull recoil starter handle/rope (D) until engine fires.

Note: If engine does not start after five pulls, use Cold Start

Procedure.

D

Stopping Engine

1.

Throttle

Release throttle trigger and allow engine to return to idle before shutting off engine.

2.

Stop Switch

Move stop switch button (A) backward to STOP position.

A

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine.

Have your ECHO dealer repair stop switch before using unit again.

X7502350103

© 05/22 ECHO Incorporated

27