Charge. Poly Voyager Free 60

Add to My manuals
21 Pages

advertisement

Charge. Poly Voyager Free 60 | Manualzz

Charge

Your earbuds have up to 5.5 hours of talk time when fully charged and can be recharged twice by a fully charged case.

1 To charge your earbuds, place them in the charge case. Your earbuds begin charging when placed in the case.

2 To recharge the case, plug it into a computer or USB charging device using the supplied USB cable. Alternatively, recharge using a third-party wireless charger (not included).

Tip: For fastest charging, plug your charge case into a power outlet.

3 Your charge case LEDs blink every 10 seconds when charging and turn off when fully charged.

Charge time

Device

Charge case and earbuds

Earbuds only

Charge case only

Charge time

Approximately 3 hours

Approximately 2 hours

Approximately 2 hours

Talk time

Device

Earbuds with ANC off

Earbuds with ANC on

Charge case

Talk time

Up to 5.5 hours

Up to 5 hours

Up to 11 hours

Check battery level

Check your earbud system battery level:

• Listen to the battery level alert when you put on the earbuds.

• View charge case LEDs. The center LED indicates the charge case battery level. Left and right LEDs show earbud battery level when earbuds are in the case.

Note: To activate LEDs, open your case lid, press the case button, or connect/ remove the charge case from a power source.

• View earbud and charge case battery level in Poly Lens App. Download at poly.com/ lens .

8

Voice alert

"Battery high"

"Battery medium"

"Battery low"

"Battery critical"

Charge case LEDs Talk time

Green

Green

Yellow

Red

3 hours or more

1 to 3 hours

10 minutes to 1 hour

Less than 10 minutes

Quick charge

Charge your earbuds for 15 minutes for up to a full hour of listening time.

Wireless charging (Qi charging)

Your charge case is compatible with third-party Qi wireless chargers.

To charge wirelessly, place the earbuds in the charge case and place your case on your compatible wireless charger. Refer to your wireless charger user guide.

Note: Your earbuds charge only when placed in the charge case. They do not charge if placed directly on the wireless charger.

9

advertisement

Key Features

  • True wireless design for a tangle-free experience
  • Active noise cancellation (ANC) to block out unwanted noise
  • Transparency Mode to let in surrounding sounds when needed
  • Up to 5.5 hours of talk time on a single charge
  • Charging case provides an additional 11 hours of power
  • Bluetooth 5.2 technology for a stable and reliable connection
  • Sweat and water-resistant for use in all conditions
  • Comfortable and secure fit for all-day wear

Related manuals

Frequently Answers and Questions

How do I pair the earbuds to my phone?
Press and hold the button on either earbud for 4 seconds until the LED flashes blue and red. Then, open the Bluetooth settings on your phone and select "Poly Voyager Free 60" from the list of available devices.
How do I adjust the volume?
While streaming media, swipe backward on the earbud swipe sensor to decrease the volume or swipe forward to increase the volume.
How do I use the ANC and Transparency Mode?
With the earbuds idle, swipe forward or backward on the earbud swipe sensor to switch between ANC and Transparency Mode.
How do I charge the earbuds?
Place the earbuds in the charging case to charge them. The earbuds begin charging when placed in the case.
How long does it take to charge the earbuds?
Approximately 2 hours