Display Indicators. Samsung SV-DVD54T

Display Indicators

1 2 3 4 5

6 7

8 9

1 The DVD Deck is active.

2 A DVD, CD is loaded

3 The time, counter position, time remaining or current deck status is displayed

4 VHS tape is inserted

5 The VCR Deck is active

6 3D sound

7 DTS disc

10

8 STEREO indicator

9 REC Mode

10 A Timer Recording is programmed or in progress.

Connecting STB-DVD-VCR to the TV using the RCA Cable

You can connect your STB-DVD-VCR to the television using the RCA cable if any appropriate Line input is available on the television. You thus:

◆ Obtain better quality sound and pictures

◆ Simplify the setting up procedure of your

STB-DVD-VCR

☛

Make sure that both the television and the STB-

DVD-VCR are switched off before connecting the cables.

1 Connect the aerial RF cable to ANT.IN on the rear of your STB-DVD-VCR.

2 Use the RCA Audio/Video cable to connect the

STB-DVD-VCR and the TV receiver.

3 Use LINE OUT on the STB-DVD-VCR and LINE IN on the TV.

Inserting Batteries in the Remote

Control

You must insert or replace the batteries in the remote control when you:

◆ Purchase the STB-DVD-VCR

◆ Find that the remote control is no longer working correctly

1 Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control.

2 Insert two AAA, RO3 or equivalent batteries, checking for polarities:

◆

◆

+ on the battery with + on the remote control

– on the battery with – on the remote control

3 Replace the cover by aligning it with the base of the remote control and pushing it back into place.

2

TV

3

1

1

➢

Use same types of batteries

ENG-7