Setting the STB-DVD-VCR Output Channel. Samsung SV-DVD54T

Setting the STB-DVD-VCR Output

Channel

Your STB-DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures.

Also, you can change the STB-DVD-VCR output channel to adjust the frequency in which information is displayed on the screen.

1 After pressing the MENU, press the OK or ❿ .

Result: The Setup menu is displayed.

2 Press the corresponding , ❷ buttons to select the Install option.

3 Press the OK or ❿ to select this option.

Result: The Install menu is displayed.

Auto Setup

Manual Setup

38

Install

CH 28

:

CH 38

:

CH 69

Selecting the Colour Mode

Before recording or playing back a cassette, you can select the required system standard.

Otherwise, the system automatically selects the reception standard when you select AUTO.

➢

◆ When playing back a cassette, the standard is automatically selected by the STB-DVD-VCR.

◆ When you playback an NTSC-recorded tape on this STB-DVD-VCR make a setting on the colour system according to your TV.

If your TV is Multi System TV (NTSC 4.43

compatible), set NT4.43 and you can record

NT4.43.

1 After pressing the MENU, press the OK or ❿ .

Result: The Setup menu is displayed.

2 Press the corresponding , ❷ buttons to select the User Set option.

3 Press the OK or ❿ to select this option.

Result: The User Set menu is displayed.

4 Press the or ❷ buttons, until the VCR Output

CH option is selected.

5 Select the required output channel (CH28~CH69) by pressing the OK or ❿ buttons

➝ CH28 ➝ .. CH38 ➝ .. CH69

6 On completion, press RETURN to exit the menu.

Then tune your television again (see page 9).

Colour System : Auto

IPC : On

G-Code Extend : Off

User Set

Auto

PAL

MESECAM

B/W

4 Press the corresponding or ❷ buttons, until the

Colour System option is selected.

5 Press the OK or ❿ button to select

Auto ➝ PAL ➝ MESECAM ➝ B/W.

Auto When playing back a cassette, the system standard is automatically selected by the

STB-DVD-VCR.

B/W Black and White

6 On completion, press RETURN three time to exit the menu.

ENG-14