advertisement
Auto Power off Screen Messages
The Auto Power Off feature automatically turns off your STB-DVD-VCR if no signal is received and you do not press any button for the selected time.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding or ❷ buttons, until the
Auto Power Off option is selected.
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Off
1Hour
2Hour
3Hour
Your STB-DVD-VCR displays most information both on the STB-DVD-VCR and the television.
You can choose to display or hide this information on the television screen (except for the SEARCH,
Programming MENU and Timer functions, which cannot be hidden).
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding or ❷ buttons, until the
Screen Messages option is selected.
Language : English
STB
Install
User Set
Auto Power Off : Off
Screen Messages : On
On
Off
3 Press the OK or ❿ buttons, until you select the time of Auto Power Off interval.
➝ Off ➝ 1Hour ➝ 2Hour ➝ 3Hour
4 On completion, press RETURN twice to exit the menu.
3 To...
Press OK or ❿ , until...
Display on-screen information On is displayed.
Hide on-screen information Off is displayed.
4 On completion, press RETURN twice to exit the menu.
ENG-16
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Safety Instructions
- 6 Disc Type and Characteristics
- 7 Front View of the STB-DVD-VCR
- 7 Rear View of the STB-DVD-VCR
- 7 Accessories
- 8 Display Indicators
- 8 Inserting Batteries in the Remote Control
- 8 RCA Cable
- 9 Coaxial Cable
- 9 Receiver or Other Equipment
- 9 Plug & Auto Set Up
- 10 Tuning Your Television for the STB-DVD-VCR
- 11 Setting the Date and Time
- 11 Setting the Menu Language
- 12 Presetting the Stations Automatically
- 13 Presetting the Stations Manually
- 14 Clearing a Preset Station
- 14 Changing the Preset Station Table
- 15 Setting the STB-DVD-VCR Output Channel
- 15 Selecting the Colour Mode
- 16 Intelligent Picture Control
- 16 G-Code Extend
- 17 Auto Power off
- 17 Screen Messages
- 18 Selecting the Cassette Type
- 18 Repeat Play
- 18 Selecting the Recording Speed
- 18 Protecting a Recorded Cassette
- 19 Recording a Programme Immediately
- 19 Recording a Programme with Automatic Stop
- 20 Using the G-Code Feature
- 21 Modifying G-Code Programming
- 22 Using the Timer Programming Feature
- 22 Checking a Preset Recording
- 23 Cancelling a Preset Recording
- 23 Playing a Cassette
- 23 Adjusting Picture Alignment Manually
- 23 Selecting the Audio Output Mode
- 24 Playing a Cassette in Slow Motion
- 24 Playing a Sequence Frame by Frame
- 24 Playing a Sequence at Variable Speeds
- 25 Searching for a Specific Sequence
- 26 Using the Tape Counter
- 27 Connecting an RCA Audio/Video Input Cable
- 27 Recording from Another VCR or Camcorder
- 28 Using the TV Buttons on the Remote Control
- 29 Choosing a Connection
- 29 Setting Up the Language Features
- 31 Setting Up the Audio Options
- 32 Setting Up the Display Options
- 33 Setting Up the Parental Control
- 34 A/V Receiver Connections
- 34 Special Playback Features
- 35 Adjusting the Aspect Ratio (EZ View)
- 36 Using the Display Function
- 37 Changing the Camera Angle
- 37 Selecting the Subtitle Language
- 38 Repeat Play
- 38 Selecting the Audio Language
- 39 Using the Mark Function
- 39 MP3/WMA Play
- 40 Picture CD Playback
- 42 Main Menu
- 42 Volume Control
- 42 Select Soundtrack
- 43 Select Videotrack
- 43 Service Favorites
- 43 Program Information
- 43 Subtitle
- 44 Teletext VBI
- 44 Installation
- 45 Channel Organising
- 46 Parental Lock
- 47 System Setup
- 48 Technical Specification (VCR,DVD)
- 49 Technical Specification (STB)
- 50 Troubleshooting Guide (VCR)
- 51 Troubleshooting Guide (DVD)
- 52 Troubleshooting Guide (STB)