Intelligent Picture Control. Samsung SV-DVD54T

Intelligent Picture Control G-CODE Extend

The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences.

1 During playback, press the MENU button on the remote control.

Result: The Setup menu is displayed.

2 Press the OK or ❿ .

Result: The Setup menu is displayed.

3 Press the corresponding , ❷ buttons to select the User Set option.

4 Press the OK or ❿ buttons to select this option.

Result: The User Set menu is displayed.

Colour System : Auto

IPC : On

G-Code Extend : Off

User Set

On

Off

To prevent delays or over-runs the STB-DVD-VCR has a function called G-CODE EXTEND allowing you to extend the recording time by up to 60 minutes.

1 After pressing the MENU, press the OK or ❿ .

2 Press the corresponding , ❷ buttons to select the User Set option.

3 Press the OK or ❿ buttons to select this option.

Result: The User Set menu is displayed.

Colour System : Auto

IPC : On

G-Code Extend : Off

User Set

Off

10

20

30

40

50

60

5 Press the corresponding or ❷ buttons, until the

IPC option is selected.

6 Press the OK or ❿ buttons to select the IPC

(intelligent picture control) option.

➢

When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically.

7 To adjust the sharpness manually, press the ❷ button to turn the IPC mode OFF.

8 Press the ➛ or ❿ buttons until the picture is displayed according to your preferences.

➢

If you do not press a button within ten seconds, the PICTURE menu disappears automatically.

9 On completion, press RETURN three times to exit the menu.

➢

You can use the IPC function with ease by using the ANGLE key on the REMOCON.

4 Press the corresponding , ❷ buttons, until the

G-Code Extend option is selected.

5 Press the OK or ❿ buttons to set the G-Code

Extend time by increments of 10 minutes.

6 To turn off, press OK or ❿ buttons repeatedly until

Off shows.

ENG-15