1 Getting Started. Pentax Optio RZ18
Hirdetés
Hirdetés
1
Getting Started
Attaching the Strap ................................... 32
Powering the Camera ............................... 33
Installing the SD Memory Card ................ 39
Turning the Camera On and Off .............. 42
Initial Settings ........................................... 44
Attaching the Strap
1
Attach the strap (O-ST104) supplied with the camera.
2
1
1
Pass the narrow end of the strap through the strap lug.
2
Pass the other end of the strap through the loop and pull tight.
32
Powering the Camera
Charging the Battery
Use the supplied battery charger (D-BC92) to charge the supplied rechargeable lithium-ion battery (D-LI92) before using it in the camera for the first time or after a long period of non-use, or when the [Battery depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125 V, 7A, minimum 6 ft (1.8 m)”
Charging indicator
While charging: Lights
Charging finished: Turns off
1
3
2
To power outlet
Battery
Battery charger
1
AC plug cord
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the battery charger so that the
PENTAX logo is facing up.
The charging indicator lights while the battery is charging and turns off when charging is finished.
4
Remove the battery from the battery charger when charging is finished.
33
1
• Do not use the supplied battery charger (D-BC92) to charge batteries other than the rechargeable lithium-ion battery D-LI92, as the battery charger may overheat or be damaged.
• The battery has reached the end of its service life when it starts to run down soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to light, the battery may be faulty. Replace it with a new battery.
The time required to fully charge the battery is about 120 minutes (max.).
(The charging time may vary depending on the ambient temperature and charging conditions.) The appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F to 104°F).
Installing the Battery
Use the rechargeable lithium-ion battery D-LI92 that is provided with the camera. Charge the battery before using it in the camera for the first time.
Battery/card cover lock lever
Battery/ card cover
34
Battery
Battery lock lever
1
Open the battery/card cover.
Slide the battery/card cover lock lever in the direction indicated by the arrow 1 and flip the cover open 2 .
2
Press the battery lock lever in the direction of 3 and insert the battery so that the PENTAX logo is facing toward the lens.
Match the marks on the battery to the marks inside the battery compartment and push the battery in until it is locked in place.
Make sure that the battery is inserted with the PENTAX logo facing toward the lens. If the battery is incorrectly oriented, malfunction may result.
3
Close the battery/card cover.
After closing the battery/card cover, slide the cover lock lever in the opposite direction indicated by 1 . When you hear a click, the cover is securely closed.
1
Removing the Battery
1
Open the battery/card cover.
2
Press the battery lock lever in the direction of 3 .
The battery will be ejected. Take care not to drop the battery when removing it.
• This camera uses a rechargeable lithium-ion battery D-LI92. Use of any other type of battery may damage the camera and cause a malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented, malfunction may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery for 30 minutes using the battery charger and store the battery separately.
Be sure to recharge the battery every 6 to 12 months. Storing the battery at or below room temperature is ideal. Avoid storing it at high temperature.
• The date and time may be returned to the default setting if the camera is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the camera is used continuously for a long period of time.
35
1
• Image Storage Capacity, Movie Recording Time, Sound
Recording Time, and Playback Time
(at 23 ° C with the display on and the battery fully charged)
Image Storage
Capacity *1
(flash used for 50% of shots)
Approx.
240 pictures
Movie Recording
Time
*2
Approx. 100 min.
Sound Recording
Time
*2
Approx. 300 min.
Playback Time
*2
Approx. 230 min.
*1 Image Storage Capacity shows the approximate number of shots recorded during CIPA-compliant testing (with display on, flash used for
50% of the shots, and 23 degrees centigrade). Actual performance may vary according to operating conditions.
*2 According to the result of in-house testing.
• In general, battery performance may temporarily deteriorate as the temperature decreases.
• Be sure to take a spare battery with you when traveling abroad or to a cold region, or if you intend to take a lot of pictures.
• Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display
(green)
(green)
(yellow)
(red)
[Battery depleted]
Battery Status
Adequate power remains.
Battery is running low.
Battery is running very low.
Battery is exhausted.
The camera will turn off after this message appears.
36
Using the AC Adapter
Use of the optional AC adapter kit (K-AC117) is recommended if you intend to use the camera for a long time or connect it to a computer.
4
8
AC plug cord
1
1
7
AC adapter
3
DC coupler
6
DC terminal
1
Make sure that the camera is turned off and open the battery/card cover.
2
Remove the battery.
Refer to p.34 - p.35 on how to open/close the battery/card cover and
remove the battery.
3
Insert the DC coupler while holding down the battery lock lever.
Confirm the DC coupler is locked in place.
4
Extract the DC coupler cord.
Pull out the tab at the joint of the camera and the battery/card cover so that the DC coupler cord can be extracted from there.
5
Close the battery/card cover.
37
1
6
Connect the DC terminal of the AC adapter to the DC terminal of the DC coupler.
7
Connect the AC plug cord to the AC adapter.
8
Plug the AC plug cord into the power outlet.
• Make sure that the camera is turned off before connecting or disconnecting the AC adapter.
• Make sure that the AC plug cord and the DC terminal connecting the
AC adapter to the camera are inserted securely. Data may be lost if either becomes disconnected while data is being recorded on the SD
Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “About the Battery Charger and the AC Adapter” (p.2)
before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter kit K-AC117 before using the adapter.
38
Installing the SD Memory Card
This camera uses SD Memory Cards, SDHC Memory Cards or SDXC
Memory Cards. (These cards are referred to as SD Memory Cards hereafter.) Captured images and sound files are saved on the SD
Memory Card when a card is inserted in the camera. They are saved in
the built-in memory when a card is not inserted (p.42).
1
• Be sure to use this camera to format (initialize) an SD Memory
Card that is unused or has been used on other cameras or digital
devices. Refer to “Formatting the Memory” (p.190) for
instructions on formatting.
• When you intend to use a brand-new Eye-Fi card for the first time, copy the Eye-Fi Manager installation file to your computer before formatting the card.
• Make sure that the camera is turned off before inserting or removing the SD Memory Card.
• The still picture storage capacity varies depending on the capacity of the SD Memory Card and the selected number of recorded pixels and
• The self-timer lamp blinks while the SD Memory Card is being accessed (data is being recorded or read).
Backing Up Data
The camera may not be able to access data in the built-in memory in the case of a malfunction. Use a computer or other device to back up important data in another location.
39
1
Battery/card cover lock lever
Battery/card cover
SD Memory Card socket
SD Memory Card
1
Open the battery/card cover.
Slide the battery/card cover lock lever in the direction indicated by the arrow 1 and flip the cover open 2 .
2
Insert the SD Memory Card into the SD Memory Card socket so that the label is facing toward the back of the camera (the side with the screen display).
Push the card in until it clicks. Data may not be recorded correctly if the card is not inserted all the way.
3
Close the battery/card cover.
After closing the battery/card cover, slide the cover lock lever in the opposite direction indicated by 1 . When you hear a click, the cover is securely closed.
To Remove the SD Memory Card
1
Open the battery/card cover.
2
Push the card into the SD Memory Card socket to eject it.
Pull the card out.
40
Number of Images Recordable on an SD Memory
Card
The file sizes of the recorded images vary depending on the number of recorded pixels of the images, so the number of images that can be saved on an SD Memory Card also varies.
1
Choose the appropriate number of recorded pixels for still pictures on the
[ A Rec. Mode] menu.
Selecting the Number of Recorded Pixels
1
Choose the appropriate number of recorded pixels and frame rate in
[Movie] on the [ A Rec. Mode] menu.
Selecting the Recorded Pixels and Frame Rate for Movies 1 p.129
For an approximate guide to the number of images or the length of
recorded movies that can be saved on an SD Memory Card, see “Main
41
1
Turning the Camera On and Off
Power switch
42
1
Press the power switch.
The camera turns on and the display turns on.
When you turn the camera on, the lens cover opens and the lens extends.
If the [Language/ ] screen or [Date Adjustment] screen appears
when you turn the camera on, follow the procedure on p.44 to set the
display language and/or current date and time.
2
Press the power switch again.
The display turns off, the lens closes, and the camera turns off.
Checking the SD Memory Card
The SD Memory Card is checked when the camera turns on and the memory status is displayed.
a
+ r
The SD Memory Card is inserted. Images and sound files will be saved on the SD Memory
Card.
The SD Memory Card is not inserted. Images and sound files will be saved in the built-in memory.
The write-protect switch on the SD Memory
Card is in the LOCK position (p.7).
Images and sounds cannot be recorded.
Memory status
09/09/2011
14:25
Starting-up in the Playback Mode
If you want to play back images or sound files straightaway without taking any pictures, you can start up the camera in the playback mode.
Power switch
1
Q button
1
Press the power switch while holding down the Q button.
The display turns on with the lens retracted and the camera turns on in the playback mode.
To switch from the playback mode to the capture mode, press the Q button or press the shutter release button halfway.
Playing Back Still Pictures 1 p.134
43
Initial Settings
1
The [Language/ ] screen appears when the camera is turned on for
the first time. Perform the operations in “Setting the Display Language”
below to set the language, and in “Setting the Date and Time” (p.48) to
set the current date and time.
The language, date, and time can be changed later. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
( 1
• To change the date and time, follow the steps in “Changing the Date and
1
Setting the Display Language
Four-way controller
4 button
3 button
1
Use the four-way controller
( 2345 ) to choose the desired display language.
English
Deutsch
Dansk
Svenska
Suomi
Polski
Italiano
Nederlands
MENU Cancel
Magyar
OK OK
44
2
Press the 4 button.
The [Initial Setting] screen appears in the selected language. If the desired settings for [Hometown] and [DST] (Daylight Saving
Time) appear, proceed to Step 3.
Proceed to “To Set Hometown and DST”
(p.47) if the desired settings do not appear.
Initial Setting
English
Hometown
New York
Settings complete
DST
MENU Cancel
Daylight saving time
3
Press the four-way controller ( 3 ) twice to select [Settings complete].
Initial Setting
English
Hometown
New York
Settings complete
DST
MENU Cancel OK OK
4
Press the 4 button.
The [Date Adjustment] screen appears. Set the date and time by
following the procedure in “Setting the Date and Time” (p.48).
1
45
1
If you accidentally select the wrong language and proceed to the next procedure, perform the following operation to set the desired language.
When the Wrong Language Has Been Inadvertently Selected
1
Press the four-way controller ( 5 ).
2
Use the four-way controller ( 2345 ) to select the desired language and press the 4 button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in the Wrong Language
1
Press the 3 button.
The setting screen is canceled and the camera is set to still picture capture mode.
2
Press the 3 button.
The [ A Rec. Mode] menu appears.
3
Press the four-way controller ( 5 ).
4
Use the four-way controller ( 32 ) to select [Language/
].
5
Press the four-way controller ( 5 ).
The [Language/ ] screen appears.
6
Use the four-way controller ( 2345 ) to select the desired language.
7
Press the 4 button.
The [ W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown],
[Date] and [Time], refer to the pages below for instructions.
• To change [Hometown], follow the steps in “Setting the World Time”
( 1
• To change the [Date] and [Time], follow the steps in “Changing the Date and
1
46
To Set Hometown and DST
3
Press the four-way controller ( 3 ).
The frame moves to [ W Hometown].
4
Press the four-way controller ( 5 ).
The [ W Hometown] screen appears.
Initial Setting
English
Hometown
New York
Settings complete
MENU Cancel
5
Use the four-way controller ( 45 ) to choose a city.
Hometown
City New York
DST
MENU Cancel OK OK
6
Press the four-way controller ( 3 ).
The frame moves to [DST] (Daylight Saving Time).
7
Use the four-way controller ( 45 ) to select O (On) or P
(Off).
8
Press the 4 button.
The [Initial Setting] screen reappears.
9
Press the four-way controller ( 3 ) to select [Settings complete].
Initial Setting
English
Hometown
New York
Settings complete
DST
MENU Cancel OK OK
10
Press the 4 button.
The [Date Adjustment] screen appears. Next, set the date and time.
1
47
1
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. Refer to “List of World Time Cities”
(p.239) for the video output format of each city that will be set at the time of initial
setting, and “Changing the Video Output Format” (p.200) for changing the video
output format.
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller ( 5 ).
The frame moves to [mm/dd/yy].
2
Use the four-way controller ( 23 ) to choose the date format.
Choose from [mm/dd/yy], [dd/mm/yy] or
[yy/mm/dd].
Date Adjustment
Date Format mm dd yy 24h
Date 01/01/2011
Time 00:00
Settings complete
MENU Cancel
3
Press the four-way controller ( 5 ).
The frame moves to [24h].
4
Use the four-way controller ( 23 ) to select [24h] (24-hour display) or
[12h] (12-hour display).
Date Adjustment
Date Format mm dd yy 24h
Date 01/01/2011
Time 00:00
Settings complete
Cancel
5
Press the four-way controller ( 5 ).
The frame returns to [Date Format].
6
Press the four-way controller ( 3 ).
The frame moves to [Date].
48
7
Press the four-way controller ( 5 ).
The frame moves to the month.
Date Adjustment
Date Format mm dd yy 24h
Date 01/01/2011
Time 00:00
Settings complete
MENU Cancel
8
Use the four-way controller ( 23 ) to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in Step 4, the setting switches between am and pm corresponding to the time.
9
Press the four-way controller ( 3 ) to select [Settings complete].
Date Adjustment
Date Format mm dd yy 24h
Date 01/01/2011
Time 00:00
Settings complete
MENU Cancel
Date Adjustment
Date Format mm/dd/yy 24h
Date 01/01/2011
Time 00:00
Settings complete
MENU Cancel OK OK
10
Press the 4 button.
This confirms the date and time.
If you press the 4 button in Step 10, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds.
1
When the [Initial Setting] or [Date Adjustment] screen is displayed, you can cancel the settings made up to that point and switch to the capture mode by pressing the 3 button. In this case, the [Initial Setting] screen will appear again the next time you turn the camera on.
49
1
[Language/ ], [Date], [Time], [Hometown], and [DST] can be changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
( 1
• To change the date and time, follow the steps in “Changing the Date and
1
• To change the city or DST setting, follow the steps in “Setting the World Time”
( 1
50
Letöltés
A nyilvános link frissítve
A csevegés nyilvános linkje frissítve lett. You may view and manage your chat links after registration here.
Dokumentum nyilvános linkje
Hirdetés