Playing Back Images. Pentax Optio RZ18
تبلیغات
تبلیغات
Playing Back Images
Playing Back Still Pictures
Q button
Four-way controller
4
1
Press the Q button after taking a picture.
The camera enters the Q mode and the captured image appears on the display
(single-image display).
File number
134
09/09/2011
14:25
To Play Back the Previous or Next Image
2
Press the four-way controller ( 45 ).
The previous or next image appears.
To Delete the Displayed Image
Press the i button while the image is displayed to display the Delete screen. Press the four-way controller ( 2 ) to select [Delete] and press the 4 button.
For information on other deletion procedures
Delete
Cancel
OK
Playing Back a Movie
You can play back the movies you have taken. The sound is played back at the same time.
Zoom lever
Q button
Four-way controller
4
1
In Q mode, use the four-way controller ( 45 ) to choose the movie you want to play back.
2
Press the four-way controller ( 2 ).
Playback starts.
09/09/2011
14:25
Available operations during playback
Zoom lever to the right ( x ) Increases the volume.
Zoom lever to the left ( w ) Reduces the volume.
Four-way controller ( 2 ) Pauses playback.
Four-way controller ( 5 ) Fast-forwards playback while the button is held down.
Four-way controller ( 4 ) Plays back in reverse.
Fast-reverses playback while the button is held down.
Available operations while playback is paused
Four-way controller ( 2 ) Resumes playback.
Four-way controller ( 5 ) Forwards the frame.
Four-way controller ( 4 ) Reverses the frame.
3
Press the four-way controller ( 3 ).
Playback stops.
135
Multi-Image Display
Zoom lever
Q button
Four-way controller
4 button
Green button
4
Four-Image Display/Nine-Image Display
You can display four or nine thumbnails of captured images at a time.
1
In Q mode, turn the zoom lever to the left ( f ).
The four-image display appears showing a page consisting of four thumbnail images.
Turn the zoom lever to the left ( f ) again to switch to nine-image display.
A page consisting of four or nine thumbnail images appears. The displayed images change four or nine images at a time page by page.
Use the four-way controller ( 2345 ) to move the frame. If there are too many images to display on one page, pressing the four-way controller ( 24 ) while the image
1 is selected will display the previous page. Similarly, if you choose image 2 and press the four-way controller ( 35 ), the next page appears.
Select & Delete 100-0010
Four-Image Display
1
1
Frame
2
2
Select & Delete 100-0010
Nine-Image Display
136
The icons that appear on the images indicate the following:
(No icon) Still picture without sound
C
O (With image)
Movie (the first frame appears)
Still picture with sound
O (Without image) Sound file only
Press the 4 button to switch to single-image display of the selected image.
Press the Q button to switch to A mode.
Folder Display/Calendar Display
In nine-image display, turn the zoom lever to the left ( f ) to switch to folder display or calendar display. Press the Green button to switch between folder display and calendar display.
1
In Q mode, turn the zoom lever to the left ( f ) three times.
The screen changes to folder display or calendar display.
Folder display
The list of folders with recorded images and sound files appears.
Four-way controller
( 2345 )
Zoom lever to the right ( y )/
4 button
3 button
Moves the frame.
Displays the images in the selected folder in nine-image display.
Returns to nine-image display.
100
103
Frame
101
104
102
100_0707
4
137
4
Calendar display
Images and sound files are displayed by date in calendar format.
A thumbnail of the first image recorded on each date is displayed on the calendar.
O appears for dates on which a sound file was the first recorded file.
Four-way controller
( 2345 )
Zoom lever to the right ( y )
4 button
3 button
Moves the frame.
Displays the images for that date in nine-image display.
Displays the first image recorded on that date in single-image display.
Returns to nine-image display.
44 55 66
Frame
11
88
22 33
Using the Playback Functions
1
Press the four-way controller ( 3 ) in Q mode.
The Playback Mode Palette appears.
2
Use the four-way controller
( 2345 ) to choose a playback mode.
The guide for the selected function appears below.
For continuously playing back images. Screen or sound effects can be set
MENU OK
3
Press the 4 button.
The selected playback function is called up.
138
09/09/2011
14:25
MENU
For continuously playing back images. Screen or sound effects can be set
MENU OK
SHUTTER
Press halfway
Rotates captured images.
Useful when viewing vertical images on a TV
MENU OK
OK
09/09/2011
14:25
Closes the Playback Mode
Palette and goes to A mode.
MENU OK
Goes to the screen for selected playback function.
4
139
4
Playback Mode Palette u s k
P
N
Playback Mode
Slideshow
Image Rotation
Small Face Filter
Digital Filter
Frame Composite
Save as Still
Image
Description
For continuously playing back images. Screen or sound effects can be set.
Rotates captured images. Useful when viewing vertical images on a TV.
Reduces the size of faces in the image, for wellproportioned portraits.
For modifying images with a Color filter or Soft filter.
For composing an image with a frame. Select
Overwrite or Save as to save.
For saving one frame from a movie as a still picture.
[
Divide
Movies
For dividing a movie into two.
Z n Resize o p
\
Red-eye
Compensation
Cropping
Image/Sound
Copy
Voice Memo
Z
Protect r
^
DPOF
Start-up Screen
Page
For compensating red-eye. May not work due to the condition of the image.
Changes Recorded Pixels and Quality Level to make the file size smaller.
For cropping images to the size you like. Saved as a new image.
For copying images and sounds between the builtin memory and SD Memory Card.
Attaches sound to images. Recording is possible till the memory card is full.
Protects images and sounds from accidental deletion. Formatting will delete protected data.
For the print settings. Useful when printing at a printing service.
For setting a captured image as the Start-up
Screen.
140
Slideshow
You can play back recorded images one after another.
1
In Q mode, use the four-way controller ( 45 ) to choose the image to start the slideshow with.
2
Press the four-way controller ( 3 ).
The Playback Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select u
(Slideshow).
For continuously playing back images. Screen or sound effects can be set
MENU OK
4
Press the 4 button.
The slideshow setting screen appears.
5
Use the four-way controller ( 23 ) to select [Start].
S l i d e s h o w s t a r t s
I I n t e r v a l
S c r e e n E f f e c t
S o u n d E f f e c t
MEN U
S t a r t
3 s e c .
Wi p e
OK
6
Press the 4 button.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow.
To resume the slideshow, press the 4 button again.
7
Press any button other than the 4 button.
The slideshow stops.
4
141
4
To Set the Slideshow Conditions
You can set the playback interval and also a screen effect and sound effect for when one image changes to the next.
1
Use the four-way controller ( 23 ) to select [Interval] in Step 5 on
Start
Inter v al
Screen Effect
Sound Effect
3 sec.
W ipe
MENU
2
Press the four-way controller ( 5 ).
A pull-down menu appears.
3
Use the four-way controller ( 23 ) to select the interval and press the 4 button.
Choose from [3sec.], [5sec.], [10sec.], [20sec.] or [30sec.].
4
Use the four-way controller ( 23 ) to select [Screen
Effect].
5
Press the four-way controller ( 5 ).
A pull-down menu appears.
6
Use the four-way controller ( 23 ) to choose the screen effect and press the 4 button.
Wipe The next image slides over the previous one from left to right
Checker The next image appears in small square mosaic blocks
Fade The current image gradually fades out and the next image fades in
Random Various effects are used randomly
Off No effect
7
Use the four-way controller ( 23 ) to select [Sound Effect].
142
8
Use the four-way controller ( 45 ) to select O or P .
Except when the [Screen Effect] is set to [Off], you can choose O (On) or P (Off) for the sound that is played when one image changes to the next.
9
Use the four-way controller ( 23 ) to select [Start] and press the 4 button.
The slideshow starts using the selected interval and effect.
• The slideshow will continue until you press any button other than the
4 button.
• Movies or pictures with sound will be played through to the end before the next picture is played back, regardless of the interval setting.
However, pressing the four-way controller ( 5 ) while playing back a movie or a picture with sound skips to the next image.
• Sound files made in Voice Recording are not played back in the slideshow.
• Panorama images are displayed by scrolling from left to right in 4 seconds before the next picture is played back, regardless of the interval or screen effect setting.
• When [Random] is selected for the screen effect, the interval is fixed and the sound effect is set to off. Also the sound of pictures with sound will not be played back.
4
Connecting the Camera to AV Equipment
1
Rotating the Image
Q button
Four-way controller
4 button
1
Press the Q button after taking a picture.
The image appears on the display.
143
4
2
Press the four-way controller ( 3 ).
The Playback Mode Palette appears.
3
Use the four-way controller
( 2345 ) to select s (Image
Rotation).
Rotates captured images.
Useful when v iewing v ertical images on a TV
MENU OK
4
Press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
5
Use the four-way controller
( 2345 ) to choose the rotation direction and press the 4 button.
The rotated image is saved.
MENU OK
• Panoramic images and movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated state.
144
Zoom Playback
You can magnify an image up to ten times.
Zoom lever
Q button
Four-way controller
4 button
1
In Q mode, use the four-way controller ( 45 ) to choose the image you want to magnify.
2
Turn the zoom lever to the right
( y ).
The image is magnified (×1.1 to ×10).
Continuing to turn the zoom lever to the right ( y ) changes the magnification continuously.
You can use the guide mark “+” appears at the bottom left of the screen to check which portion of the image is magnified.
Available operations while an image is magnified
2 .0×
Four-way controller
( 2345 )
Zoom lever to the right ( y )
Zoom lever to the left ( f )
Moves the position to be magnified.
Makes the image bigger
(max. ×10).
Makes the image smaller
(min. ×1.1).
3
Press the 4 button.
The image returns to single-image display.
Guide
Movies cannot be magnified.
4
145
4
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback)
You can enjoy playing back images with the subjects’ faces zoomed up simply by pressing the I button (Face close-up playback) if the Face
Detection function operated when the images were taken.
Zoom lever
Q button
I button
4 button
1
In Q mode, use the four-way controller ( 45 ) to choose the image you want to magnify.
2
Confirm that the I icon is displayed in the image and press the I button.
The image is magnified around the face first detected when the image was taken.
If multiple faces were detected when the image was taken, the subjects’ faces are zoomed up on each time the I button is pressed in order of the detection during shooting.
146
Available operations during the Face close-up playback mode
Zoom lever to the right ( y )
Zoom lever to the left ( f )
Zooms on the subject being displayed for Face close-up playback at an equal or slightly larger magnification ratio.
Zooms on the subject being displayed for Face close-up playback at an equal or slightly smaller magnification ratio.
3
Press the 4 button.
The image returns to single-image display.
• Face close-up playback is not available for movies and images that are saved as still pictures from the movies.
• The magnification ratio for Face close-up playback may differ depending on the conditions such as the size of the face detected when shooting.
• Face close-up playback is also available for images taken with the pet detection function.
4
147
دانلود
تبلیغات