Messages
9
Messages such as the following may appear on the display during camera operation.
Message
Battery depleted
Memory card full
Memory card error
The built-in memory is not formatted
Card is not formatted
Card is locked
Compression error
No image/sound
Movie recording stopped
The camera will turn off to prevent damage from overheating
Description
The battery is exhausted. Charge the battery using the
battery charger (p.33).
The SD Memory Card is full and no more images can be saved.
Insert a new SD Memory Card or delete unwanted images
(p.39, p.148).
Change the number of recorded pixels of recorded images
and try again (p.160).
Shooting and playback are impossible due to a problem with the SD Memory Card. You may be able to display or copy the images on the card using a computer.
The data within the built-in memory are damaged. Format the built-in memory.
The SD Memory Card you have inserted is unformatted or has been formatted on a computer or other device and is not compatible with this camera. Format the SD Memory
Card in the camera (p.190).
The SD Memory Card is write-protected (p.7).
This message appears when the camera fails to compress an image. Change the number of recorded pixels of the image and try shooting or saving it again.
There are no image/sound files on the SD Memory Card.
This message appears when the internal temperature of the camera has exceeded normal operating limits while recording a movie.
The camera turned off because it has overheated. Wait until it cools down and then turn it back on.
Deleting
Camera cannot play this image and sound
Image folder cannot be created
This message appears while deleting an image or sound file.
You are trying to play back an image or sound in a format not supported by this camera. You may be able to play it back on another brand of camera or on your computer.
The largest file number (9999) has been assigned to an image in the largest folder number (999) and no more images can be saved. Insert a new SD Memory Card or
format the card/built-in memory (p.190).
230
Message
Protected
Data being recorded
Data being processed
Description
The image or sound file you are trying to delete is protected
(p.153).
Displayed when you try to switch to Q mode while an image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Built-in memory full
No image to be processed
This image/sound cannot be processed
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
No card in the camera Displayed when no SD Memory Card is inserted.
The built-in memory is not enough to copy images/sounds
Cannot process correctly
Displayed when there is insufficient built-in memory to perform copying.
Displayed when Red-eye Compensation processing fails.
Not enough battery power remaining to activate Pixel Mapping
This card isn’t compatible with this camera
The version of this Eye-
Fi card is outdated
Appears during pixel mapping if the battery level is insufficient. Replace the battery with a fully charged one or
use an AC adaptor kit K-AC117 (optional). (p.37)
Displayed when the version of the Eye-Fi card is out of date
and not supported by the camera (p.224).
9
231
