Bluetooth audio player. Pioneer AVIC-EVO1-G72-QYI

Bluetooth audio player

Playback screen 1

Skips files forward or backward.

Plays files in random order.

Playback screen 2

— A2DP and AVRCP (Audio/Video Remote Control Profile):

Playing back, pausing, selecting songs, etc., are possible.

p Depending on the Bluetooth audio player connected to this product, some functions may not be available.

p While you are listening to songs on your Bluetooth device, please refrain from operating the phone function as much as possible. If you try operating, the signal may cause noise for song playback.

p When you are talking on the Bluetooth device connected to this product via Bluetooth, it may pause playback.

p By rotating the rotary encoder, you can also skip to the next file or previous file.

p By rotating and holding the rotary encoder, you can also perform fast reverse or fast forwards.

Starting procedure

p Before using the Bluetooth audio player, register and connect the device to this product.

 Refer to Registering your Bluetooth devices

on page 28

1 Display the “ System ” setting screen.

Sets a repeat play range.

Switches between playback and pause.

Selects a file from the list.

 Refer to Selecting files from the file name list on

page 49

p Depending on the Bluetooth audio player connected to this product, the available operations with this product may be limited to the following two levels:

— A2DP (Advanced Audio Distribution Profile): Only playing back songs on your audio player is possible.

AUX source

Hides the touch panel keys.

To display again the keys, touch anywhere on the screen.

Switches between the video input and the sound input.

HOME

2 Touch [ AV Source Settings ].

3 Confirm that “ Bluetooth Audio ” is turned on.

4 Display the AV source selection screen.

HOME

5 Touch [ Bluetooth Audio ].

Selecting files from the file name list

p This function is available only when the AVRCP version of the

Bluetooth device is 1.4 or higher.

1 Touch .

2 Touch a file or a folder on the list to play back.

p A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection.

 Refer to the Installation Manual.

p You can set the screen size for the video image.

 Refer to Changing the wide screen mode

on page 62

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake.

Starting procedure

You can display the video image output by the device connected to video input.

1 Display the “ System ” setting screen.

HOME

2 Touch [ Input/Output Settings ].

3 Confirm that “ AUX Input ” is turned on.

4 Display the AV source selection screen.

49

< CRB4880-A >