utility products introduction


Add to my manuals
137 Pages

advertisement

utility products introduction | Manualzz

Utility Mounting Brackets

Switch Mounting Bracket,

Galvanized

4-1/2” x 1/4” Steel for Wood Poles

SP-6019-GLV

23-3/4”

Mtg Holes

15° Adjustments

(top & bottom)

Top View Side View

Bottom View

Three-piece galvanized steel mounting bracket.

Designed to mount fuse and disconnect switches to a wood pole. Four adjustments on top and bottom in 15° increments.

Meter Mounting Bracket,

Galvanized for Wood Poles

3/16” Steel w/ 5/16” Slots

SP-6029-GLV

1.5”

12.75”

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

2. All assemblies are supplied standard with galvanized fasteners.

Steel bracket for mounting meter base on wood pole.

Galvanized after fabrication.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-6

4/7/15

12.83”

Utility Mounting Brackets

Wire Protector Bracket,

Galvanized

1.67” x 1.65” x 1/4” Steel for Wood Poles

SP-6279-GLV

15.88”

Protects the wire by running it inside the channel so it is not visible, acting as a theft deterrent.

Meter Loop Cabinet Bracket,

Galvanized for Wood Poles

1/8” Steel w/ 17/32” Slots

SP-6175-GLV

R5”

3-3/4”

16”

Top View

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

2. All assemblies are supplied standard with galvanized fasteners.

Two-piece galvanized steel mounting bracket. Designed to mount cabinet to Class 1 through Class 6 wood distribution poles. 5/8” diameter holes for mounting to pole.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-7

Utility Mounting Brackets

Wall Bracket, Horizontal Support,

Galvanized Steel f or Transformer Vault

2” x 2” x 1/4” Angle w/ (4) 9/16” & (2) 11/16” Holes

SP-6253-GLV

14”

12”

Used as a horizontal support in transformer vaults.

Galvanized after fabrication.

Cutout Mounting Bracket,

Galvanized Steel

1-1/2” x 3/8” w/ (2) 11/16” Holes

SP-6004-GLV

6”

10.25”

Attaches to the A26 vertical support brace to provide a point of attachment for cutouts on a 17’

2 pole platform bank. Three brackets required per station. Galvanized after fabrication.

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-8

4/7/15

Mounting Bracket, Steel for Group Operated Switch

7” Channel x 16” w/ (4) 11/16” Holes

SP-6132-GLV

Group operated switch mounting.

Galvanized after fabrication.

Guard, Anti-Climbing,

Galvanized Steel

1-15/16” x 48” x 10 Ga Steel

SP-6274-GLV

Works in conjunction with the conduit Stand-off

Brackets to prevent individuals from climbing poles.

Galvanized after fabrication.

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-9

33.88”

Angle Brace, Galv Steel for Wood Crossarm

1-1/2” x 1-1/2” x 1/4” w/ 9/16” & 11/16” Hole

SP-6260-GLV

4”

Angle brace for wood crossarm.

Galvanized after fabrication.

Note: 1. Steel brackets are hot dipped galvanized per ASTM A123

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

Page U1-10

1/4/16

Relay Mounting Panel, Galv Steel

2-3/4” x 5-1/2” x 12 Ga Steel w/ (4) 6-32NC, (2)10-32NC & (2) 1/4” Holes

SP-6278-GLV

Mounting Angle, Galv Steel

1” x 2” x 4-1/4”

SP-6280-GLV

Adapter Clip, Galv Steel

1/2” x 1-3/8” w/ 3/16” Holes

SP-6281-GLV

Note: 1. See Reference Section for available paint colors.

www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435

4/7/15

Page U1-11

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents