Recommendations and tips. Sennheiser EK 2000 IEM
Add to my manuals
41 Pages
Sennheiser EK 2000 IEM: professional wireless in-ear monitoring system with adaptive diversity technology for crystal-clear sound. Easy setup and synchronization with SR 2000 IEM and SR 2050 IEM transmitters, offering a range of up to 300 feet. Adjustable volume and limiter for personalized listening experience. Operates on 5 UHF frequency ranges with up to 3,000 receiving frequencies per range, including factory-preset and freely selectable channels.
advertisement
Recommendations and tips
Recommendations and tips
... for the diversity receiver
• Make sure that the antenna and the earphones cable do not cross.
• For best results, make sure that the transmitter sensitivity is correctly adjusted.
... for optimum reception
• Transmission range depends to a large extent on location and can vary from about 10 m to about 150 m. There should be a “free line of sight” between transmitting and receiving antennas.
• To avoid overloading the receiver, observe a minimum distance of 5 m between transmitting and receiving antennas.
... for multi-channel operation
• When operating a multi-channel system, you should only use the channels within one frequency bank. Each of the frequency banks “ 1 ” to
“ 20 ” accommodates factory-preset frequencies which are intermodulation-free.
• The frequency banks “ U1 ” to “ U6 ” allow you to freely select and store receiving frequencies (see page 24).
• When using several transmitters simultaneously, interference can be avoided by maintaining a minimum distance of 20 cm between two transmitters.
31
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Important safety instructions
- 5 The EK 2000 IEM diversity receiver
- 5 Areas of application
- 6 The frequency bank system
- 7 Delivery includes
- 8 Product overview
- 8 Overview of the EK 2000 IEM diversity receiver
- 9 Overview of the displays
- 11 Putting the diversity receiver into operation
- 11 Inserting the batteries/accupack
- 11 Charging the accupack
- 12 Connecting the earphones
- 12 Attaching the diversity receiver to clothing
- 14 Using the diversity receiver
- 14 Switching the diversity receiver on/off and adjusting the volume
- 15 Deactivating the lock mode temporarily
- 16 Selecting a standard display
- 17 Using the operating menu
- 17 The buttons
- 17 Overview of the operating menu
- 19 Working with the operating menu
- 21 Adjusting settings via the operating menu
- 21 The main menu “Menu”
- 25 The extended menu “Advanced Menu”
- 29 Synchronizing a transmitter with the diversity receiver
- 29 Setting the transmitters to intermodulation-free channels (Easy Setup Sync)
- 30 Synchronizing transmitters with diversity receivers (Sync)
- 31 Using freely selectable receiving frequencies
- 31 Cleaning the diversity receiver
- 32 Recommendations and tips
- 33 If a problem occurs ...
- 34 Accessories
- 35 Specifications
- 37 Manufacturer Declarations
- 39 Index