Time left display. Miele H 5961 B

Food probe

Time left display

After a certain time, the estimated time

remaining (i.e. the time left to run), appears in the oven display.

The actual core temperature is no longer displayed and cannot be called up.

The time remaining is calculated from the oven temperature selected, the required core temperature and the pattern of the increasing core temperature.

The time remaining first shown is an estimate. As the cooking process continues the time remaining is revised continuously, and a more accurate revised figure shown.

If, while the time remaining is showing in the display:

– the oven or core temperature is altered,

– or a different oven function is chosen,

– or the door is left open for a particular length of time all the time remaining information will be cancelled and the actual core temperature will re-appear in the display. The time left display will reappear after a while.

If the door is opened during an automatic programme the time remaining will continue to show in the display.

Making use of residual heat

The heating in the oven switches off shortly before the end of the cooking programme. The residual heat in the oven is sufficient to complete the cooking process.

Using the residual heat in the oven saves energy.

"Energy save phase" will appear in the display to show that the oven is in

Energy save mode. The time remaining will continue to be visible in the display.

The cooling fans continue to run, as do the hot air fans if a "fan" setting has been chosen.

When the core temperature selected has been reached,

– the oven switches off automatically.

– the message "Programme finished" and the

O symbol appear in the display.

– a buzzer will sound.

If the food is not yet cooked sufficiently, insert the food probe into another place and repeat the programme.

38