Straight and crossover cable configuration. Netcomm HS800

Straight and crossover cable configuration

Figure 3

Figure 4

RJ11 connector and cable

An RJ-11 connector is the small, modular plug used for most analog telephones. It has six pin slots in the head, but usually only two or four of them are used.

RJ-11 Connector

Pin Assignment

3

4

1

2

5

6

Normal Assignment

Signal Ground

CTS

RXD

TXD

+5 Volts In

Signal Ground

Figure 5 www.netcomm.com.au

Page 58

Rev. 1 - YML698

HS800 User’s Guide