Increasing the contrast of an image. Minolta Dimage Scan Elite II

Increasing the contrast of an image

The contrast of an image can be changed. The light blue 45° line on the tone curve chart represents the original contrast of the scanned image. Making the angle of the tone curve greater than

45° will increase the contrast of the image. Making the angle less than 45° will reduce the contrast.

With the RGB channel selected, click on the tone curve near the top and bottom to add two nodes.

Slightly move the top node up and the bottom node down. This will increase the angle of the central portion of the tone curve and increase the contrast of the image without making an overall change in image brightness.

RGB

Correcting color with the tone curve

By selecting individual color channels on the tone curve, adjustments to the overall color of an image can be made. This can be used to eliminate unnatural color casts or add warmth to a picture.

If the image is too red, green, or blue, simply drag the corresponding color-channel curve down until the color is appears natural. If the color cast is predominantly one of the secondary colors, cyan, magenta, or yellow, move the curve of the complementary color up. For example, if the image is too yellow, move the blue curve up. For more on secondary and complementary colors, see page 54.

When daylight film is used under fluorescent lighting without a flash, the resulting photograph has a green cast. To correct the image, display the green channel tone curve. Click on the center of the curve and move it down. Use the prescan image to judge the results.

G

57