USING JOB FILES. Minolta Dimage Scan Elite II

USING JOB FILES

The Standard Scan Utility contains approximately 110 preinstalled Job files to cover a wide range of image use.

1

Click the load Job button .

• The Job-selection dialog box will appear.

2

Select a category from the drop-down list.

3

Click a Job file name to select it. Click

[OK] to apply the Job to the image.

• The scan settings of the selected Job file are displayed on the right side of selection window.

• The Job names can be listed chronologically or alphabetically. Click the name or date option radio button to sort the Job files.

• When the Job file is loaded, the cropping frame will automatically appear on the image. The frame is proportional to the output type specified. The frame can be resized, but the proportions of the frame will remain the same. The input and output data are also automatically adjusted to match the change of the cropping frame.

• Once made, scan settings remain in effect until changed.

75