Quitting the Standard Scan Utility. Minolta Dimage Scan Elite II

Quitting the Standard Scan Utility

To turn off the scanner at the end of a scanning session, following steps 1 through 4. To restart the computer, following steps 1 through 3.

1

Quit the Standard Scan Utility software or close Photoshop

Elements.

2

Press the eject button to unload the film holder or APS adapter.

• The scanner automatically ejects the 35mm film or slide mount holder to the initial inserting position. Do not touch or hinder the holder while it is moving.

35mm

• When using the optional APS Adapter, the scanner automatically rewinds the film when the eject button is pressed. Do not remove the adapter until the rewind motor has stopped.

3

Close the front door.

35mm

4

Press the main switch to turn off the scanner.

• Unplug the scanner when cleaning or when the product is not in use for extended periods.

• When using the IEEE 1394 cable with Windows Me, complete the “Unplug or eject hardware” operation by double-click on the “Unplug or eject hardware” icon on the task bar before turning off the scanner (see page

87). This step is unnecessary if the computer is shutdown before turning off the scanner.

35mm

85