DiaTools User's Guide

54 DiaTools User’s Guide

Illustration 19: Interface dialog box

1) SCSI interface

For the installation of the Adaptec SCSI card, see the handbook accompanying the card. The installation of the

Windows ASPI driver is important. You can check the connected SCSI devices by calling up the Adaptec SCSI interrogator (SCSI Explorer). Your film recorder must be recognized here, and you can also read the ID number in this window. The ID number in the input field must match the ID number of the film recorder. The preset number is 6.

2) GPIB interface

For the installation of the GPIB card (AT-GPIB or GPIB-PCI from National Instruments) see the handbook accompanying the card. The test programs IBDIAG and IBTEST must run without errors.

For the GPIB interface, a „primary address“ must be set, which corresponds exactly to the number in the input field.

The preset number is 2.

5

.4.4 Options | LUT...

This menu item enables the transfer of a LUT file or CCF file to the film recorder before exposure start, thus ensuring that the images are exposed with the same LUT, even when the LUT in the