Whac A Mole SE Manual

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

MARQUEE DISPLAY AND FLORESCENT

BULB / BALLAST REPLACEMENT

Back to TOC

1. Turn off A.C. power to the game and unplug the game from the A.C. receptacle.

2. Remove the (8) screws that hold the marquee cover graphics to the marquee.

3. Remove the graphics panel.

MARQUEE

GRAPHICS

PANEL

SCREWS

SCORE

DISPLAY

Score Display Removal

1. Remove the (4) hex nuts from the back of the score display.

2. Remove the score display from the marquee.

3. Remove the ribbon cable from the bad display.

4. Remove the (12) screws and the plastic back from the back of the score display.

3. Remove the (4) hex standoffs that hold the board to the mounting bracket.

SCREWS

STANDOFFS

DISPLAY

RIBBON CABLE

PLUG

4. Assemble in reverse order.

NOTE: BE CAREFUL TO PLUG THE RIBBON CABLE IN PROPERLY TO ASSURE

PROPER FUNCTION AND TO AVOID DAMAGE TO THE BOARD.

Florescent Bulb Replacement

1. Remove the retaining clip that secures the bulb to the standoff.

2. Press the RED lock button of the fixture to release the bulb.

BULB

RED LOCK

BUTTON

RETAINING

CLIP

SCORE DISPLAY

(SIDE VIEW)

3. Replace the bulb in reverse order.

NOTE: BE SURE THAT THE NEW BULB IS PROPERLY SNAPPED INTO THE HOUSING

TO AVOID IT COMING OUT FROM THE VIBRATION OF NORMAL GAME PLAY. ALSO,

BE SURE THAT THE RETAINING CLIP IS SECURELY SNAPPED TO THE STANDOFF.

23