advertisement
Service Manual Overview
19
Braun ThermoScan PRO 4000 Lock
Press the lock tab toward the Braun ThermoScan PRO 4000 thermometer until it clicks. To release the housing, insert the lock release pin into the lock release hole until the lock tab snaps back.
Figure 6. Spot LXi with Braun ThermoScan PRO 4000 Lock
Lock release pin
Lock tab
Lock release hole
Blood Pressure Hose and Cuff
Identify and have available the Spot LXi, blood pressure cuff, and the blood pressure hose.
1.
Inspect the blood pressure hose; notice that one end has a single, gray connector fitting and the other end has two white fittings.
2.
Squeeze the side tabs on the gray connector and completely push the blood pressure hose connector into the blood pressure hose connection port until it clicks into place
(see Figure 5 on page 18).
3.
Twist the white connectors on the blood pressure hose and cuff connectors together.
Thermometer
Spot LXi is available with either the SureTemp Plus thermometer or the Braun
ThermoScan PRO 4000 thermometer.
SureTemp Plus
SureTemp Plus is available with two probes and matching wells; one for oral/axillary temperatures (blue ejection button and probe well) and one for rectal temperatures (red ejection button and probe well).
Caution The SureTemp Plus feature only operates with the probe well in place.
1.
Align the probe well with the tabs facing up and down into the round opening of the
SureTemp Plus housing on the right side of Spot LXi. Push it into place.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 1 - Safety Summary
- 9 Introduction
- 9 Warnings and Cautions
- 9 General Warnings
- 10 Blood Pressure Warnings
- 12 Temperature Warnings
- 13 Warnings
- 14 General Cautions
- 15 Blood Pressure Cautions
- 15 Temperature Cautions
- 15 Cautions
- 16 Electrostatic Discharge (ESD)
- 17 Symbols
- 17 Safety Symbols
- 17 Button Symbols
- 18 Connection Symbols
- 18 Agency Symbols
- 19 2 - Overview
- 19 Purpose and Scope
- 19 Other Applicable Documents
- 20 Contents Checklist
- 20 Possible Attachments
- 21 Service
- 21 Technical Assistance
- 21 Field Replacement Units
- 21 Service Loaners
- 21 Service Intervals
- 22 Spot Vital Signs LXi Configurations
- 22 Controls
- 24 Display Window
- 26 Connections
- 27 Braun ThermoScan PRO 4000 Lock
- 27 Blood Pressure Hose and Cuff
- 27 Thermometer
- 28 Sensor
- 28 Quick Reference Card
- 29 AC Power Transformer
- 29 Battery
- 29 Standby Mode
- 31 3 - Functional Overview
- 31 Self Test
- 32 Internal Configuration Mode
- 36 Functional Verification
- 36 Blood Pressure Functional Check
- 37 Temperature Functional Check
- 40 Functional Check
- 41 4 - Calibration
- 42 Connections
- 42 Voltage Calibration
- 43 Blood Pressure Calibration
- 43 Configuration Calibration
- 45 5 - Troubleshooting
- 45 Error Codes
- 47 Battery Voltage Check
- 47 Window Display Check
- 47 Blood Pressure Calibration Check
- 48 Temperature Functional Check
- 48 Functional Check
- 48 Functional Testing Procedures
- 49 Current Test
- 49 Noise Levels
- 49 Button Test
- 49 Interface Test
- 50 Pneumatic Tests
- 50 Temperature Test
- 50 Overpressure Test
- 51 Service Work Checklist
- 51 Spot Vital Signs
- 53 6 - Disassembly and Repair
- 56 Key Pad Disassembly
- 57 Circuit Board Disassembly
- 57 Masimo
- 58 Nellcor
- 59 Blood Pressure Circuit Board Disassembly
- 61 LCD Inverter Ballast Board Disassembly
- 61 LCD Disassembly
- 62 Pump Disassembly
- 62 RS232-Communication Circuit Board Disassembly
- 63 Fan and Power Circuit Board Disassembly
- 63 Thermometry Circuit Board Disassembly
- 65 SureTemp Plus
- 67 Braun ThermoScan PRO
- 69 7 - Technical Overview
- 69 System Description
- 69 Battery System
- 69 Battery Charger
- 69 “CPU I/O” Power Supply
- 69 CPU Core Power Supply
- 70 +5V Supply
- 70 Clock/Calendar Power
- 70 Mod F NIBP Power
- 70 and Thermometer Power
- 70 LCD Power
- 71 External Load (RS-232) Power
- 71 SureTemp Plus Thermometer Interface
- 71 Braun ThermoScan PRO 4000 Thermometer Interface
- 71 Description
- 72 Bar Code Scanner Description
- 73 Printer Description
- 74 Interconnect Diagram
- 75 8 - Field Replaceable Units
- 79 9 - Specifications
- 79 Performance
- 79 Blood Pressure Accuracy
- 80 Temperature Specifications
- 81 Specifications
- 81 Masimo Sensor Accuracy Guide
- 81 Masimo Patents
- 82 Nellcor Sensor Accuracy Guide
- 82 Nellcor Patents
- 83 Mechanical
- 83 Electrical
- 83 Patents
- 83 Battery
- 83 Environmental
- 84 Wireless Radio
- 84 Guidance and Manufacturer’s Declaration
- 84 Emissions and Immunity Information
- 87 10 - Maintenance and Service
- 87 Cleaning
- 87 Spot Vital Signs LXi
- 87 Blood Pressure Cuff
- 87 Blood Pressure Hose and Cable
- 87 SureTemp Plus Thermometer
- 88 Braun ThermoScan PRO 4000 Thermometer
- 88 Sensors
- 88 Printer
- 89 Battery Replacement
- 89 Spot Vital Signs LXi
- 90 Braun ThermoScan PRO
- 90 Printer
- 91 A - Repair Test Specifications
- 91 General Unit Test
- 91 A-D Noise Test
- 91 Leak Test
- 91 Inflation Test
- 91 Dump Test
- 91 Pneumatic Accuracy Test
- 92 Valve Control Test
- 92 Voltage Calibration
- 92 Blank Mode Current Test
- 92 Back Light (Idle) Current Test
- 92 Valve/Pump Mode Current Test
- 92 Interface Test
- 92 Temperature Option Requirements
- 92 Accuracy Test
- 93 Temperature Probe Test
- 93 Option Requirements
- 93 Functional Test
- 93 Mode Current Test
- 93 Fail Safe Test
- 93 Over Pressure Test
- 93 Over 15 mmHg
- 95 B - Supplies and Accessories
- 95 Blood Pressure
- 96 Temperature
- 97 Pulse Oximetry
- 97 Masimo Accessories
- 98 Nellcor Accessories
- 99 Miscellaneous
- 99 Service Contracts
- 101 C - Miscellaneous Mounting Accessories
- 101 Wall Mount Kit
- 103 Mobile Stand Kit
- 105 DPAC Mounting Accessory
- 106 Printer Mounting Accessory
- 107 Scanner Mounting Accessory
- 109 Spot LXi
- 109 Accessories