Integrated scale <i>(optional)</i>. FP optimail 30

102

optimail 30 Operator Manual

13.15

Integrated scale

(optional)

13.15.1 Zeroing

The integrated scale is automatically zeroed if deviations from the zero point are detected. This is indicated by a pop up message.

You must zero the scale if you wish to weigh with a pre-load (e.g. when using an extra scale platform).

Scale and Postage Rate Maintenance

Zero Adjust

• Setting the desired initial state for the scale: Remove load from scale or place pre-load in position.

• Press the key.

• Select in the menu: SCALE AND

POSTAGE RATE MAINTENANCE

ZERO ADJUST.

A pop up message indicating that the scale is being zeroed appears in the display for some seconds. The scale is zeroed as soon as the message disappears.

13.15.2 Setting the gravity

To determine the weight the scale measures the gravity between the earth and the object on the scale platform. This force depends on the latitude and the distance to the geocentre. To have the exact weight displayed you must therefore specify the location of your franking machine.

Scale and Postage Rate Maintenance

Gravity Setting

Select location (region)

• Press the key.

• Select in the menu: SCALE AND

POSTAGE RATE MAINTENANCE

GRAVITY SETTING.

• Select the location of your franking machine.

The optimail 30 saves the setting and returns to the SCALE AND POSTAGE RATE MAIN-

TENANCE menu.