About the Book
At a Glance
Document Scope
This manual describes how to install network and bus interfaces on PLCs from the
Premium and Atrium range.
It is made up of 7 sections:
1. Communication on the processor’s terminal port
2. FIPIO communication master integrated into processors
3. AS-i bus interface: TSX SAY 100module
4. AS-i bus interface: TSX SAY 1000module
5. Communication: TSX SCY 21601 module and PCMCIA cards
6. Communication: TSX ETY 110/410/PORT/510 modules
7. Communication: TSX MDM 10 PCMCIA Modem card
User Comments
We welcome your comments about this document. You can reach us by e-mail at
[email protected]
TSX DM 57 xx
13
About the Book
14
TSX DM 57 xx
Terminal Port Communication
I
At a Glance
Aim of this Part
What's in this
Part?
This part introduces the communication function via the Terminal Port for Premium and Atrium processors
This part contains the following chapters:
Chapter
1
2
Chapter Name
Terminal Port
TSX P ACC 01 device
Page
17
47
TSX DM 57 xx
15
Terminal Port
16
TSX DM 57 xx
Terminal Port
1
At a Glance
Aim of this
Chapter
What's in this
Chapter?
This Chapter introduces the functions of the Terminal Port for Premium and Atrium processors.
This chapter contains the following sections:
Section
1.1
1.2
1.3
Topic
Introduction to the terminal port
Connections
Appendices
Page
18
25
43
17
TSX DM 57 xx
