ALL P48 Models. RED LION CONTROLS P48, T48

Below you will find brief information for Temperature Controller T48, Process Controller P48. These controllers are designed to provide accurate temperature or process control for a wide range of industrial applications. They feature a user-friendly interface, multiple configuration options, and advanced control modes including PID and ON/OFF, making them suitable for various heating and cooling processes. You can remotely set desired control points and monitor various parameters like temperature, setpoint, and heater current through the built-in serial communication interface.

PDF

Document

Key features

Temperature and Process Control
PID and ON/OFF control modes
User-friendly interface
Serial communication interface
Remote setpoint capability
Alarm functions
Heater current monitor (T48)
Field-replaceable output boards

Frequently asked questions

The controllers have 9 configuration parameter modules.

The T48 controller accepts thermocouple or RTD sensors.

The controllers offer PID control, ON/OFF control, and manual control modes.

You can configure the controllers using the front panel buttons or through the RS-485 serial communication interface with the SFCRM configuration software. More details are provided in the instruction manual.

You can configure alarms for various actions, such as high or low temperature deviations, heater current break, and band in or out. The alarms are adjustable and have a standby feature to prevent activation during initial power-up.