Chapter 5: File system extraction. CelleBrite UFED series 4PC
Publicitate
Publicitate
Chapter 5: File system extraction
Chapter 5: File system extraction
The File System Extraction function enables you to perform a full system extraction from a device.
81
5.1. Performing a file system extraction
1) Click Extract from Mobile Device and identify the device, then click File System Extraction.
82
2) The Select Mode screen appears.
3) Select ADB (for Android Backup, see
Android backup
90
The Select Extraction Location screen appears.
Chapter 5: File system extraction 83
84
4) To change the target path: a) Click Change target path. b) In the Browse For Folder dialog, browse to the location where you want to save the extraction. c) Select the desired location, or click Make New Folder to create a target directory. d) Click OK.
The target path is set.
5) Click Next.
Chapter 5: File system extraction
The Waiting for Device screen appears.
6) Select the correct cable and tip for the mobile device based on the information written in the screen.
7) Change the device settings according to the instructions
8) Connect the device.
9) Click Continue.
85
86
The Extraction in Progress screen appears.
During the extraction process, the progress bar for the Source and then the Target is active.
Chapter 5: File system extraction
NOTE: For QCP and Samsung MTK devices, an estimation of the time the extraction will take is displayed.
87
When extraction is complete the File System Extraction Summary screen appears.
88
10) Click the required button.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
5.2. The file system extraction folder
At the end of the file system extraction process, the extracted data is saved in the location you selected previously (see Performing a File System Extraction)
Chapter 5: File system extraction
NOTE: The extracted data folder is named "FileSystemDump" with the selected device model and name and the extraction operation date. For example, "FileSystemDump Nokia GSM Nokia
2626 2014_03_12 (001)"
89
The extracted data folder contains:
Zipped archive of the device file system containing files and folders in the same structure they were extracted.
UFD file containing the system extraction information, used by the UFED Physical
Analyzer application.
PM file.
The File System extraction can be viewed using the UFED Physical Analyzer.
90
5.3. Android backup
The Android Backup feature communicates with a connected Android device and enables you to characteristics. Android backup supports Android devices with version 4.1 and later.
Android Backup may provide less data then other methods, therefore, you should use this feature when other file system methods such as ADB are not successful, or when other file system methods are not available for the device (for example, if the android version is not supported).
There are two extraction methods:
No Shared: Extracts all the applications (native and non-native) that reside on the device.
With Shared: Extracts all the applications (native and non-native) that reside on the device plus method takes additional time for the extraction. If this method is not successful you should try the
No Shared method.
To extract data using Android backup:
1) Click Extract from Mobile Device and identify the device, then click File System Extraction.
Chapter 5: File system extraction
The following screen appears.
2) Click Android Backup.
A message appears to indicate that Android backup mode extracts the data according to the
3) Click Continue.
91
92
4) Select the target path and click Next.
The waiting for Device screen appears.
The Extraction in Progress screen appears.
Chapter 5: File system extraction
5) Click Continue, and then select Backup my data on the device.
The following screen appears.
93
The following screen appears.
94
6) Click No if you do not want to try extract data from a shared location. Click Yes if you want to try extract information from a shared location.
The following screen appears.
Chapter 5: File system extraction
7) Follow the instructions and click OK.
When the extraction is complete the File System Extraction Summary screen appears.
95
96
8) Click the required button.
To open the extraction in UFED Physical/Logical Analyzer.
To add additional extraction types for the same device.
To end the process and return to the home screen.
Descarcă
Publicitate