Chapter 9: Device tools
Chapter 9: Device tools
The Device Tools are located on the home screen and include the following:
(page
)
(page
)
(page
)
(page
)
(page
)
(page
)
(page
)
159
160
Chapter 9: Device tools
9.1. Bluetooth Scan
NOTE: This feature is available for Bluetooth-enabled PCs only.
This tool scans for available Bluetooth devices in your proximity and enables you to pair with them.
Make sure that the Bluetooth feature of the device is enabled.
161
Make sure that the Bluetooth switch is on.
To perform a Bluetooth scan:
1) Click Device Tools and then click Bluetooth scan
The Connecting Bluetooth prompt appears.
.
162
2) Click Continue.
3) A list of Bluetooth devices in the vicinity appears. Select one or the following options:
Click one of the devices Device summary screen appears
Click Continue Device summary screen appears
Chapter 9: Device tools
Click Refresh list - Device tool in progress screen appears and UFED 4PC tries to find additional devices.
163
164
9.2. Switch to CDMA offline mode
This tool enables you to switch radio on CDMA devices to offline mode.
To switch to CDMA offline mode:
1) Click Device Tools and then click Switch to CDMA offline mode.
The Select Link prompt appears.
2) Select the link type (USB Cable or Serial Cable).
Chapter 9: Device tools
The Device Tool in Progress screen appears.
The Device Tool Summary appears.
165
166
9.3. Test peek/poke functionality
This tool enables you to perform a Peek/Poke test in order to check if the device is supported by the
UFED 4PC.
To Test Peek/Poke functionality:
1) Click Device Tools and then click Test Peek/Poke functionality.
The Select Link prompt appears.
2) Select the link type (USB Cable or Serial Cable).
Chapter 9: Device tools
The Device Tool in Progress screen appears.
The Peek check reply prompt appears.
3) Click Continue.
The Device Tool in Progress screen appears.
The Reporting prompt appears.
167
168
9.4. Activate TomTom trip log
This tool enables you to activate or deactivate the trip log sharing feature of a connected TomTom device, which is often disabled by the user
To Activate TomTom trip log:
1) Click Device Tools and then click Activate TomTom trip log.
The Select Mode prompt appears.
2) Select the desired mode.
A prompt labeled Attention appears requesting to connect the device to the PC.
3) Connect the device to the PC.
4) Click Continue.
9.5. Uninstall windows mobile client
In order to perform Logical Extraction, the client is installed on the device. In some cases, due to device failure, or if the mobile device was improperly disconnected from the UFED 4PC, the client remains installed on the mobile device.
This option enables the client to be manually uninstalled.
Chapter 9: Device tools
9.6. Uninstall Android client
In order to perform Logical Extraction, the client is installed on the device. In some cases, due to device failure, or if the mobile device was improperly disconnected from the UFED 4PC, the client remains installed on the mobile device.
This option enables the client to be manually uninstalled.
169
9.7. Exit Odin mode
In order to perform Logical Extraction, the device is placed in Odin mode. In some cases, due to device failure, or if the mobile device was improperly disconnected from the UFED 4PC, the mobile device remains in Odin mode.
This option enables the device to be taken out of Odin mode.
170