20.8.4 Batch Windows Mobile Device - Retrieving Data from the Device. Wasp Barcode Technologies InventoryControl

InventoryControl Printable Help

20.8.4 Batch Windows Mobile Device - Retrieving Data from the Device

The Send Data to PC function enables you to send data from the mobile device to your PC. You will use this function after you have performed transactions (add, move, etc.) and need to send the data back to the PC.

Note: This applies to batch devices only. If you are using a wireless connection you will not need to retrieve information from the mobile device. Your mobile device will be connected directly to the database and any changes/additions you make on the mobile device will immediately update the database. For information about using a wireless connection, please refer to the topic

Using a Mobile

Device with a Wireless Connection

.

Sending Data to the PC:

of mobile device installed, a menu will appear allowing you to select which device you will be working with. If you have only one type, the Mobility Menu for that device will appear at the bottom of the screen.

The Wasp Mobile Device Communication Wizard screen displays with the Mobile Device to

PC tab displayed:

409

InventoryControl Printable Help

Make sure the device is attached to the PC, then click Next.

3. The data uploaded from the Windows Mobile Device is sent to an XML file.

410