DV recording. LiteOn LVW-5001, LVW-5005, LVW-5005XS

Recording

DV recording

Before you to start to record DV contents

This DVD Recorder allows basic DV control functions with the

Remote Control. The DVD Recorder is equipped with a camcorder control (Play, Stop, FF or Reverse) feature via the DV

Link connection. Simply move the screen cursor to the desired function and press [ENTER] at DV input screen.

Use “Easy Guider” to record DV signal

1.Power on your TV and this DVD-Recorder.

2.Place a recordable disc on the tray. Make sure the disc’s label is facing up.

3.Connect the DV cable (IEEE-1394 4-pin cable) to both the DV Camcorder and the DVD-Recorder.

8.Press [

p] [q] to select “DV” Input, and press

[ENTER] to confirm.

9.Press [

p] [q] to select the recording quality,

and press [ENTER] to confirm.

10.Press [ENTER] to start recording.

Notes:

1.The DV-Link input jack on this unit is for use with DV compatible camcorder only.

2.Only DV signals can be input to the DV-Link jack on this DVD

Recorder.

3.Do not connect a MICRO MV format video camcorder to this DV-

Link (IEEE-1394) jack.

4.You cannot connect more than two pieces of video input sources at a time to the front panel connector of this DVD-Recorder.

4.Power on the DV Camcorder. Start “Playback mode” on the DV Camcorder.

5.“Pause” the DV Camcorder where you want to record.

6.Press [ GUIDER] on the remote control. This actives the Easy Guider menu.

7. Press [

p] [q] and to select the “RECORD”

icon, and press [ENTER] to confirm.

18

Notes:

This DVD-Recorder will stay in “Pause” mode when no DV input signal is detected.

11.To pause recording.

Press [ PAUSE ] on the remote control to pause recording .

Press [ PAUSE ] again, if you want to resume recording.

12.To stop recording.

Press [ ]

LVW-5001 model

Before playing a DVD+R disc on compatible equipment, you will need to finalize the disc.

LVW-5005 model

Before playing a DVD+R/DVD-R/DVD-RW disc on compatible equipment, you will need to finalize the disc.