Wireless thermostat set „FS20 STR“

22

e) Setting the date and time

• If there is a protective film over the display, remove it.

• If you have you have not inserted the batteries yet, follow the instructions for doing so on page

17.

After inserting the batteries, an automatic display test is performed (all segments and displays of the LC display briefly appear).

You can then set the year, month, day, and time in hours and minutes on the wireless thermostat.



Use the scroller to change the displayed values. To confirm your selection, briefly press the ‘PROG’ button.

• After inserting the batteries, the year is displayed:

MO DI MI DO FR SA SO

Figure 5

0 6 12

18 24

Use the scroller to set the year. To confirm your setting, briefly press the ‘PROG’ button.

• The month is displayed:

MO DI MI DO FR SA SO

Figure 6

0 6

12

18 24

Use the scroller to set the month and confirm your setting by pressing the ‘PROG’ button.

• The day is displayed:

MO DI MI DO FR SA SO

Figure 7

0 6 12

18 24

Use the scroller to set the day and confirm your setting by pressing the ‘PROG’ button.

• The hours are displayed:

MO DI MI DO FR SA SO

Figure 8

0 6

12

18 24

Use the scroller to set the hour of the day and confirm your setting by pressing the ‘PROG’ button.

• The minutes are displayed:

MO DI MI DO FR SA SO

Figure 9

0 6

12

18 24

Use the scroller to set the minutes of the hour and confirm your setting by pressing the ‘PROG’ button.

• The wireless thermostat is then returned to normal operating mode.

23