![](http://s1.manualzz.com/store/data/006968847_1-b161275e10545daaed9850e779736457-128x128.png)
advertisement
![Wireless thermostat set „FS20 STR“ | Manualzz Wireless thermostat set „FS20 STR“ | Manualzz](http://s1.manualzz.com/store/data/006968847_1-b161275e10545daaed9850e779736457-360x466.png)
40
9. Changing the battery of the ‘FS20 STR’
If the battery icon ‘ ‘ appears in the LC display, the battery voltage is low and the batteries will have to be replaced.
To replace the batteries, proceed as follows:
• Take the wireless thermostat off the wall holder and open the cover of the battery compartment cover (slide down in the direction of the arrow on the cover).
• Remove the empty batteries from the battery compartment and dispose of them according to the applicable environmental regulations, see section 14. b).
• Insert two new AA batteries; make sure the polarity is correct. The polarity is embossed on the battery compartment.
Use high-quality alkaline batteries for the longest possible operation.
• Close the battery compartment.
• Then enter the date and time (as for initial operation, see section 6. e).
The time program settings, comfort/lowering temperature, etc. are maintained and need not be entered again.
advertisement
Related manuals
advertisement
Table of contents
- 5 1. Prescribed use
- 5 2. Scope of delivery
- 6 3. Explanation of icons
- 7 4. Safety instructions
- 7 a) General information
- 9 b) Batteries and rechargeable batteries
- 10 5. System description
- 10 a) General information
- 11 b) Operating principle
- 11 c) 868.35MHz
- 16 d) Programming the house code and address
- 17 6. Initial system operation
- 17 a) Inserting batteries into the ‘FS20 STR’, replacing the batteries
- 18 b) ‘FS20 STR’ wireless thermostat controls
- 19 c) ‘FS20 ST-2’ switch socket controls
- 20 d) Mounting the ‘FS20 STR’ on the wall
- 20 1. Choosing a suitable installation location
- 21 2. Mounting the wall holder
- 22 e) Setting the date and time
- 24 f) Connecting the ‘FS20 ST-2’ switch socket
- 25 7. Programming the ‘FS20 STR
- 25 a) Setting the comfort temperature and lowering temperature
- 27 b) Setting/changing the week profile
- 30 c) Operating modes
- 32 d) Button lock (for buttons and scroller)
- 33 8. Special functions
- 35 a) Setting a hysteresis (‘HYSt’)
- 35 b) Setting the date and time (‘dAt’)
- 35 c) Setting and transmitting the house code and the address (‘dAt’)
- 38 d) Switching between heating and cooling regulation (‘CooL’)
- 39 e) Status indicator (‘StAt’)
- 40 9. Changing the battery of the ‘FS20 STR
- 41 10. Operating the wireless switch socket “FS20 ST
- 41 a) Switching the consumer on/off manually
- 42 b) Deleting the wireless switch socket’s programming
- 43 11. Information on the range
- 44 12. Handling
- 45 13. Maintenance and cleaning
- 46 14. Disposal
- 46 a) General information
- 46 b) Battery/rechargeable battery disposal
- 47 15. Technical specifications
- 47 a) ‘FS20 STR’ wireless thermostat
- 47 b) ‘FS20 ST-2’ wireless switching socket
- 48 16. Quick reference guide
- 49 17. Declaration of conformity (DOC)